Robotics and Computation MSc

London, Bloomsbury

The MSc Robotics and Computation at UCL provides training from world-leading experts in robotics and autonomous systems (RAS), which are set to shape innovation in the 21st century, underpinning research in a wide range of challenging areas: the ageing population, efficient health care, safer transport, and secure energy. The UCL edge in scientific excellence, industrial collaboration and cross-sector activities make it ideally placed to drive IT robotics and automation education in the UK.

UK students International students
Study mode
Full-time
UK tuition fees (2022/23)
£16,500
Overseas tuition fees (2022/23)
£32,100
Duration
1 calendar year
Programme starts
September 2022
Applications accepted
All applicants: 18 Oct 2021 – 31 Mar 2022

Applications open

Entry requirements

A minimum of an upper second-class UK Bachelor's degree (or international qualification of an equivalent standard) in a highly quantitative subject such as computer science, mathematics, electrical or electronic engineering, or the physical sciences. Additionally, applicants must have some experience with a programming language such as C/C++, Java, Python, or Matlab. Relevant work experience may also be considered.

English language requirements

If your education has not been conducted in the English language, you will be expected to demonstrate evidence of an adequate level of English proficiency.

The English language level for this programme is: Good

UCL Pre-Master's and Pre-sessional English courses are for international students who are aiming to study for a postgraduate degree at UCL. The courses will develop your academic English and academic skills required to succeed at postgraduate level. International Preparation Courses

Further information can be found on our English language requirements page.

Equivalent qualifications

Country-specific information, including details of when UCL representatives are visiting your part of the world, can be obtained from the International Students website.

International applicants can find out the equivalent qualification for their country by selecting from the list below. Please note that the equivalency will correspond to the broad UK degree classification stated on this page (e.g. upper second-class). Where a specific overall percentage is required in the UK qualification, the international equivalency will be higher than that stated below. Please contact Graduate Admissions should you require further advice.

About this degree

As a student on the MSc Robotics and Computation, you will learn about robotic and computational tools for robotics and autonomous systems, as well as their main computational components: kinetic chains, sensing and awareness, control systems, mapping, and navigation. You be able to specialise in selected topics, including machine learning, human-machine interfaces, and computer vision.

Students on this programme will take modules to the value of 180 credits, on successful completion of which they will be awarded MSc Robotics and Computation.

Who this course is for

This programme is designed to appeal to students with a quantitative educational background who wish to equip themselves for careers in the robotics industry and the diverse application domains of robotic technologies.

What this course will give you

  • UCL received the highest percentage (96%) for quality of research in Computer Science and Informatics in the UK's most recent Research Excellence Framework (REF2014).
  • UCL Computer Science graduates are highly valued as a result of the department's strong international reputation, strong links with industry, and ideal location close to the City of London.
  • UCL Computer Science contains some of the world's leading researchers in computer graphics, geometry processing, computer vision and virtual environments.
  • The programme team takes an experimental approach to our subject, enjoy the challenge and opportunity of entrepreneurial partnerships, and place a high value on our extensive range of industrial collaborations.
  • With the external project involvement anticipated, students on this programme will have the opportunity to interact and collaborate with key companies in the industry - Airbus, Shadow Hand, OC Robotics and Intuitive Surgical - and work on real-world problems through industry-supported projects.
  • Recent investment across UCL in the Faculty of Engineering and The Bartlett Faculty of the Built Environment has created the infrastructure for an exciting robotics programme, which will be interdisciplinary and unique within the UK and Europe.

The foundation of your career

Alumni have been employed at global companies, whilst others have gone on to pursue further study or a career in academia.

Employability

The programme is designed to prepare you to enter a robotics-related industry or any other occupation requiring engineering or analytical skills. You will develop the skills required to create new robotics solutions and solve computational challenges in automation, which are likely to be in demand globally across many industrial sectors, spanning manufacturing, security, mining, design, transport, exploration, and healthcare.

The research-based curriculum promotes strong research skills, which you will develop through your final research project/ dissertation; you will be well equipped to undertake doctoral research in robotics and computational research specific to robotics, but translational across different analytical disciplines or applied fields that will be influenced by new robotic technologies and capabilities.

Teaching and learning

You will be assessed through a range of methods across the programme, which will vary depending on any optional or elective module choices. The programme’s core curriculum is typically assessed by methods including coursework, lab work, individual and group projects, class tests, written examinations, oral assessments, and, in all cases, culminating in a final research project/ dissertation.

Contact time takes a variety of forms, including lectures, seminars, tutorials, project supervisions, demonstrations, practical classes and workshops, visits, placements, office hours (where staff are available for consultation), email, videoconference, or other media, and situations where feedback on assessed work is given (one-to-one or in a group).

Each module has a credit value that indicates the total notional learning hours a learner will spend on average to achieve its learning outcomes. One credit is typically described as being equal to 10 hours of notional learning, which includes all contact time, self-directed study, and assessment.

The contact time for each of your 15 credit taught modules will typically include 22-30 hours of teaching activity (classroom based and/ or online) over the term of its delivery, with the balance then comprised of self-directed learning and working on your assessments. You will have ongoing contact with teaching staff via each module’s online discussion forum, which is typically used for discussing and clarifying concepts or assessment matters, and will have the opportunity to access additional support via regular office hours with module leaders and programme directors.

Your research project/ dissertation module is 60 credits and will include regular contact with your project supervisor(s), who will guide and support you throughout your project. You will dedicate most of your time on this module to carrying out research in connection with your project and writing up your final report.
 

Modules

Full-time

The MSc Robotics and Computation is a one-year programme.

In term 1, you will study topics in robotic systems engineering and control theory. You will choose from a wide range of specialist optional modules, which may include, for example, image processing, machine learning, machine vision, and visual computing.

In term 2, you will study topics in robotic sensing, interaction, vision, and navigation. You will choose further optional topics, which may include sensors, imaging, perception, and human-robot interaction. You will also begin preparation for your final research project/ dissertation.

In term 3, you will primarily focus on your final research project/ dissertation and any examinations that take place in the main examination period.

Part-time

Not applicable.

Flexible

Not applicable.

Please note that the list of modules given here is indicative. This information is published a long time in advance of enrolment and module content and availability is subject to change.

Students undertake modules to the value of 180 credits. Upon successful completion of 180 credits, you will be awarded an MSc in Robotics and Computation.

Fieldwork

Not applicable.

Placement

Not applicable.

Accessibility

Details of the accessibility of UCL buildings can be obtained from AccessAble accessable.co.uk. Further information can also be obtained from the UCL Student Support & Wellbeing team.

Online - Open day

Graduate Open Events: Applying for Graduate Study at UCL

Fees and funding

Fees for this course

UK students International students
Fee description Full-time
Tuition fees (2022/23) £16,500
Tuition fees (2022/23) £32,100

The tuition fees shown are for the year indicated above. Fees for subsequent years may increase or otherwise vary. Where the programme is offered on a flexible/modular basis, fees are charged pro-rata to the appropriate full-time Master's fee taken in an academic session. Further information on fee status, fee increases and the fee schedule can be viewed on the UCL Students website: ucl.ac.uk/students/fees.

Additional costs

All full-time students are required to pay a fee deposit of £2,000 for this programme. All part-time students are required to pay a fee deposit of £1,000.

Students will require a modern computer (PC or Mac). The minimum specifications should be 8GB RAM and 500GB SSD storage. A computer with the stated specifications will cost approximately £500.

Some students run Linux on their PCs while others run Windows with Linux Virtual Machines installed.

Not applicable.

For more information on additional costs for prospective students please go to our estimated cost of essential expenditure at Accommodation and living costs.

Funding your studies

For more information about funding opportunities for Department of Computer Science postgraduate programmes, please see the departmental Scholarships page.

For a comprehensive list of the funding opportunities available at UCL, including funding relevant to your nationality, please visit the Scholarships and Funding website.

Next steps

Students are advised to apply as early as possible due to competition for places. Those applying for scholarship funding (particularly overseas applicants) should take note of application deadlines.

There is an application processing fee for this programme of £90 for online applications and £115 for paper applications. Further information can be found at Application fees.

When we access your application we would like to learn:

  • why you want to study Robotics and Computation at graduate level
  • why you want to study Robotics and Computation at UCL
  • what particularly attracts you to the chosen programme
  • how your academic and professional background meets the demands of this challenging programme
  • where you would like to go professionally with your degree

Together with essential academic requirements, the personal statement is your opportunity to illustrate whether your reasons for applying to this programme match what the programme will deliver. 

Due to competition for places on this programme, no late applications will be considered. Students with visa requirements or applying for scholarships are advised to apply early.

Please note that you may submit applications for a maximum of two graduate programmes in any application cycle.

We recommend that you submit your application as soon as possible. The programme may remain open if places are still available after 31 March 2022 and will be closed as soon as it is full or by 30 June 2022.

UCL is regulated by the Office for Students.

This page was last updated 28 Sep 2021