The LSM 880 is a scanning confocal system with four detectors (including Airyscan) on an upright microscope. Features temperature-regulated detectors, electronics, and scanners for versatile imaging.
Primary Specifications
The LSM 880 is a fast, sensitive, linear scanning confocal system for versatile imaging of different samples. A unique design offers the best combination of efficiency, flexibility, maintenance and upgrade opportunities.
- Six laser lines (405, 458, 488, 514, 561, 633nm)
- A range of objectives allowing fast imaging of low-level fluorescence in sections or slices (e.g. 25x/0.8NA PlanApo multi-immersion, 0.57mm working distance)
- GaAsP detectors allowing 96 frames/second image acquisition in FAST mode (512x512 pixels).
- Includes Zeiss control and analysis software (ZEN) on the microscope and a free-standing workstation.
Detailed specifications
- The next generation of detector arrays offers many advantages.
- The GaAsP detector has a 2x better signal to noise ratio for less sample bleaching and faster image acquisition.
- Thel GaAsP detectors have a quantum efficiency of typically 45%.
- A sequential acquisition mode allows spectral imaging with spectral resolution to 3 nm.
- The spectral detection system offers excellent sensitivity, lowest dark noise and noise-free digital gains to adjust the balance of even the most extreme dye combinations.
- Diode 405nm | Argon multiline 458/488/514nm (25mW) | DPSS 561nm (20mW) | HeNe 633nm (5mW).
- Software controlled, apochromatically corrected pinhole.
- Axio Imager Z2 upright microscope with TFT touchscreen control in docking station to allow for incubation chamber (optional).
- Transmitted light brightfield and DIC, with incident light fluorescence Optional Solent Scientific microscope incubation system with temperature control for stable long term imaging and CO2 module.
- Widefield epifluorescence module with HXP long lifetime metal halide light source Fluorescence filters for blue, green and red emission.
- Motorised X/Y stage with software control Piezo Z stage with 500 micron movement range ZEN 2 LSM software including 3D and 4D reconstruction and animation.
- Analysis and quantification for co-localisation and spectral unmixing.
- The LSM 880 uses the Zeiss Efficient Navigation software (ZEN), which provides a logical, easy to understand user interface.
- The new smart setup function is a highlight of the ZEN software platform. Acquisition setup is easily achieved by selecting the dyes you wish to use in your experiment from within the software.
- The software intelligently allows preference for speed, signal or both. This makes the LSM 880 very easy to configure and allows users to become quickly proficient in acquiring the best quality images.
- Emission bands may be flexibly selected to within 1nm accuracy, without emission filters or secondary dichroics.
- The unique emission loop ensures up to 99.8% of emission light reaches the detectors.
- A flexible beampath with the innovative TwinGate main beamsplitter provides up to 50 combinations of excitation laser lines with reflected laser light suppression between OD6 and OD7.
- Transmitted light detector for simultaneous brightfield, DIC and fluorescent imaging.
- xy, xz, xyz, xyzt, lambda (spectral scan),line scan and spot scan modes.
- Freely selectable ROI for laser scanning and photobleaching/photoactivation with ms switching between photo bleaching and collection of confocal data.
- Scan speeds of up to 13 frames/second with 512 x 512 pixels.
- Variable increase in scan speed depending on frame size (e.g. 215 frames/second at 512 x 16 pixels, unidirectional - 430 fps if in bidirectional mode).
- Lasers, with laser power at fibre output.
Bookings
All UCL staff and students can book this equipment through Outlook. Bookings are made by the hour starting on the hour.
Please contact Dr Ramin Sadri (R.Sadri@ucl.ac.uk) for details.
Once you are registered as a user, please provide the following mandatory information when you book.
Internal bookings
- Full name
- Department
- Your Finance Officer's name
- Account code for charges
- The equipment you wish to use
- Hours / dates required
External bookings
- Full name
- Company address and department name
- Finance contact details: address, telephone number and email
- PO number
- PO Description: equipment name, date and hours booked
- VAT number
- Amount
Image credit
Zeiss