Thermal Analyses

A full list of CNIE Thermal Analyses equipment

TGA7 (Perkin Elmer)

Photo of TGA7 (Perkin Elmer)

Ranges of use:

  • Temperature: : 30 to 1000°C
  • Purge gas: switchable between N2 and air

High Balance Sensitivity

  • Balance is Thermally Isolated From Furnace
  • Fast Cool Down Increases Throughput
  • High Speed Microprocessor for Control of All Functions
  • Built-in Diagnostics Continuously Monitor and Analyze All System Functions
  • Specification please refer to Pyris 1 TGA

AD 6000 Ultra MicroBalance (Perkin Elmer)

Photo of AD 6000 Ultra MicroBalance (Perkin Elmer)

Capacity: 1g, Resolution: 0.1μg

The PerkinElmer® AD 6000 balance auto-balance offers a wide range of features, including high performance, fully automated operation, and user convenience.
Features/Benefits

  • High resolution to 0.1 µg 
  • Capacity: 1g
  • Weighing range of 0.1 µg to 1000 mg
  • Automatic calibration, tare and weight range routines simplify operation    
  • RS-232 option allows connection to instruments for direct weight reading

Pyris 1 TGA-MS (Perkin Elmer & Hiden)

Photo of Pyris 1 TGA-MS (Perkin Elmer & Hiden)

Temperature: 30 to 1000°C, Purge gas: N2

TGA Design:  A vertical design with a high sensitivity balance and quick response furnace. The balance is located above the furnace and is thermally isolated from it. A precision hang-down wire is suspended from the balance down into the furnace. At the end of the hang-down wire is the sample pan. The sample pan’s position is reproducible.

Sample Atmosphere:  Static or dynamic, including nitrogen or air
Standard Furnace Temperature Range:  Subambient to 1000 °C
Scanning Rates:                  0.1 °C/minute to 200 °C/minute 
Temperature Precision:      ±2 °C
BalanceTare:                        Reproducible to ±2 μg
Sensitivity:                            0.1 μg
Accuracy:                             Better than 0.02%
Precision:                             0.001%
Capacity:                              1300 mg
Hang-down wires:               High temperature quartz
Sample pans:                        Platinum with capacity of 60 μL
Sample mass range:            Up to 1300 mg

Cooling: Forced air cooled with an external fan and internal booster purge; 1000 °C to 40 °C in less than 15 minutes under normal operation

Hyphenated techniques: Compatible with mass spectrometers (MS)

Gas switching: Fast, thorough and efficient due to reduced furnace volume. Less than 3 minutes to purge the sample area of ambient gases (remove 99% of oxygen) and replace the volume with an inert purge gas. 10 minutes to achieve a 99.99% oxygen-free environment.

SC 8000 (Perkin Elmer)

Photo of DSC 8000 (Perkin Elmer)

Temperature: -80 to 750°C, Purge gas: N2 or He
Typical applications:

Isothermal kinetics studies - Measure samples at a true constant temperature

UV curing in polymers - Rapid response measures even the fastest cures

Process and product improvement - Demanding industrial and academic research
Features & Benefits:

All new double-furnace design delivers the most accurate heat-flow measurements
Symmetrical design ensures that instrument response from sample and reference pans are always identical
Non-oxidating, chemically resistant platinum alloy furnaces
Controlled heating and cooling for the most accurate result
Maximum Temperature 750 °C 
Minimum Temperature -80 °C
Purge gas: N2 or He