dr paul shearing
- Room 306
- Roberts Building
- Chemical Engineering
- Dept of Chemical Engineering
- Faculty of Engineering Science
My research interests are in electrochemical engineering – the study and design of electrochemical processes in devices including fuel cells, batteries and electrochemical reactors. I am involved in a wide range of projects which include understanding and development of Li batteries, development of Solid Oxide Fuel Cells (SOFCs), electro-reduction of spent nuclear fuels using molten salt reactions, and monitoring corrosion in PEM fuel cells.
I currently hold a Royal Academy of Engineering Research Fellowship entitled “4-dimensional tomography of electrochemical devices”. Over the past 5 years I have pioneered the application of multi-length scale microscopy and tomography to explore material microstructures for fuel cells and batteries, providing unique insight into the fundamental relationship between microscopic materials structure and macroscopic device performance; this work has included a number of world firsts, including: the first high resolution tomographic study of Li-ion battery electrodes and the first application of X-ray absorption spectroscopy imaging to SOFC bulk electrodes. In tandem with relevant modelling tools it is possible to understand microscopic physical phenomena in these materials.
I have published more than 25 peer reviewed papers in this area over the past 5 years, including three invited review papers and a recently completed book chapter (due for publication Autumn 2013). These publications have attracted extensive citation, my 2009 paper “3D Reconstruction of SOFC Anodes using a FIB Lift-Out Technique” was the most cited paper in the journal Chemical Engineering Science for 2009-10. I am the recipient of a US Dept. of Energy Stanford (SSRL) Science Highlight for his paper “Multi Length Scale Microstructural Investigations of a Commercially Available Li-ion Battery Electrode”.
I have delivered numerous talks at international conferences, including a invited Keynote speeches at ISSM-SOFC (Tokyo, 2013) and Nanofair 2012 (Dresden) – as well as many invited talks at universities and companies in the UK, Europe, USA and Canada.
My research makes extensive use of synchrotron radiation and I have successfully conducted experiments at Diamond Lightsource (UK), Stanford Synchrotron Radiation Lightsource (CA, USA) the Advanced Photon Source (IL, USA), the European Synchrotron Radiation Facility (ESRF, Grenoble, France) and the Paul Scherrer Institut SLS (Switzerland). Recently I have started to explore the complementarities offered by coupled X-ray and neutron imaging and spectroscopy.
- Tomography of Electrochemical Devices
A study of the effect of compression on the performance of polymer electrolyte fuel cells using electrochemical impedance spectroscopy and dimensional change analysis
Predominance diagrams of uranium and plutonum species in both lithium chloride-potassium chloride eutectic and calcium chloride
A study of the effect of water management and electrode flooding on the dimensional change of polymer electrolyte fuel cells
3D morphological evolution of Li-ion battery negative electrode LiVO during oxidation using X-ray nano-tomography
Exploring microstructural changes associated with oxidation in Ni-YSZ SOFC electrodes using high resolution X-ray computed tomography
Multi Length Scale Microstructural Investigations of a Commercially Available Li-Ion Battery Electrode
Comparison of residual oil cluster size distribution, morphology and saturation in oil-wet and water-wet sandstone
Using Synchrotron X-Ray Nano-CT to Characterize SOFC Electrode Microstructures in Three-Dimensions at Operating Temperature
In 2006, I graduated with the top first in Chemical Engineering at Birmingham University and in the same year was awarded the university’s Sir John Cadman Prize and the Salter’s Institute Graduate Prize. From 2006-09 I completed a PhD in Dept. Earth Science and Engineering, Imperial College under the supervision of Prof Nigel Bandon as part of the UK Supergen Fuel Cells Programme. My thesis “Characterisation of Solid Oxide Fuel Cells in Three-Dimensions” was awarded the Imperial College, Janet Watson Memorial Prize for Research Excellence.
After a short post-doctoral appointment at Imperial, I joined Dept. Chemical Engineering at UCL as a lecturer in July 2011 – shortly after I won a RAEng Research Fellowship entitled, which I will hold until 2016. Since starting at UCL my research has attracted over £1.5M funding, including grants from the MRC, RAEng, Office of Naval Research and STFC. I lead the STFC funded Global Challenge Network in Batteries and Electrochemical Energy Devices, the network brings together leading international researchers from industry and academia. Through this and other projects, I engage actively with industry including Xradia, General Motors, Tata Steel and Praxair.