Prof Julian Evans - Publications 

    2013

    • Sanchez-Vazquez, S. A., Hailes, H. C., Evans, J. R. G. (2013). Hydrophobic Polymers from Food Waste: Resources and Synthesis. POLYMER REVIEWS 53(4), 627-694 doi:10.1080/15583724.2013.834933. Author URL
    • Zhang, Y., Evans, J. R. G. (2013). Morphologies developed by the drying of droplets containing dispersed and aggregated layered double hydroxide platelets. JOURNAL OF COLLOID AND INTERFACE SCIENCE 395, 11-17 doi:10.1016/j.jcis.2012.09.089. Author URL

    2012

    • Alexander, S. J., Lin, T., Brett, D. J. L., Evans, J. R. G., Cibin, G., Dent, A., Sankar, G., Darr, J. A. (2012). A combinatorial nanoprecursor route for direct solid state chemistry: Discovery and electronic properties of new iron-doped lanthanum nickelates up to La 4Ni 2FeO 10 - δ. Solid State Ionics
    • Fearn, S., Rossiny, J. C. H., Kilner, J. A., Evans, J. R. G. (2012). Measurement of oxygen transport in La0.8Sr0.2MnO3 perovskite grains. SOLID STATE IONICS 211, 51-57 doi:10.1016/j.ssi.2012.01.029. Author URL
    • Lu, X., Chen, L., Amini, N., Yang, S., Evans, J. R. G., Guo, Z. X. (2012). Novel methods to fabricate macroporous 3D carbon scaffolds and ordered surface mesopores on carbon filaments. JOURNAL OF POROUS MATERIALS 19(5), 529-536 doi:10.1007/s10934-011-9501-x. Author URL
    • Lu, X., Evans, J. R. G., Heavens, S. N. (2012). A comparison of the tape casting of alpha- and beta-alumina. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 32(16), 4219-4228 doi:10.1016/j.jeurceramsoc.2012.07.013. Author URL
    • Lu, X., Evans, J. R. G., Heavens, S. N. (2012). Ceramic domes fabricated by a combination of tape casting and vacuum forming. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 32(3), 681-687 doi:10.1016/j.jeurceramsoc.2011.10.014. Author URL
    • Walley, P., Zhang, Y., Evans, J. R. G. (2012). Self-assembly of montmorillonite platelets during drying. BIOINSPIRATION & BIOMIMETICS 7(4), ARTN 046004 doi:10.1088/1748-3182/7/4/046004. Author URL
    • Zhang, Y., Evans, J. R. G. (2012). Alignment of layered double hydroxide platelets. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS 408, 71-78 doi:10.1016/j.colsurfa.2012.05.033. Author URL
    • Zhang, Y., Evans, J. R. G. (2012). Approaches to the manufacture of layered nanocomposites. APPLIED SURFACE SCIENCE 258(6), 2098-2102 doi:10.1016/j.apsusc.2011.03.151. Author URL

    2011

    • Chen, B. Q., Evans, J. R. G. (2011). Mechanical Properties of Polymer-Blend Nanocomposites with Organoclays: Polystyrene/ABS and High Impact Polystyrene/ABS. J POLYM SCI POL PHYS 49(6), 443-454 doi:10.1002/polb.22202.
    • Chen, Y., Evans, J. R. G., Yang, S. (2011). A rapid-doping method for high-throughput discovery applied to thick-film PTCR materials. Journal of the American Ceramic Society 94(11), 3748-3756 doi:10.1111/j.1551-2916.2011.04667.x.
    • Evans, J. R. G., Zhang, Y. (2011). Ordered nanocomposites: materials for the postoleum generations. Fabrication, Functionalization and Characterization of Nanofillers intended for Polypropylene Nanocomposites.
    • Gao, F., Yang, S. F., Hao, P. W., Evans, J. R. G. (2011). Suspension Stability and Fractal Patterns: A Comparison using Hydroxyapatite. J AM CERAM SOC 94(3), 704-712 doi:10.1111/j.1551-2916.2010.04149.x.
    • Zhang, Y. M., Evans, J. R. G., Yang, S. F. (2011). Corrected Values for Boiling Points and Enthalpies of Vaporization of Elements in Handbooks. J CHEM ENG DATA 56(2), 328-337 doi:10.1021/je1011086.
    • Zhang, Y., Evans, J. R. G. (2011). Layered nanocomposites of plate-like particles and polymers. Nanotech 2011:. ( Vol. 2:Electronics, Devices, Fabrication, MEMS, Fluidic pp.854-). Cambridge, Mass. NSTI.

    2010

    • Akthar, F., Evans, J. R. G. (2010). High porosity (> 90%) cementitious foams. Cement and Concrete Research 40, 352-358 doi:10.1016/j.cemconres.2009.10.012.
    • Chen, L. F., Evans, J. R. G. (2010). Drying of colloidal droplets on superhydrophobic surfaces. J COLLOID INTERF SCI 351(1), 283-287 doi:10.1016/j.jcis.2010.07.037.
    • Chen, L. F., Evans, J. R. G. (2010). Spontaneous manufacturing: alumina 128-well plates made by droplet drying. ADV APPL CERAM 109(1), 51-55 doi:10.1179/174367609X456020.
    • Evans, J. R. G. (2010). The curious story of toxic ice. Education in Chemistry 47(6)
    • Evans, J. R. G., Stride, E. P. J., Edirisinghe, M. J., Andrews, D. J., Simons, R. R. (2010). Can oceanic foams limit global warming? CLIM RES 42(2), 155-160 doi:10.3354/cr00885.
    • Herath, H. M. T. U., Di Silvio, L., Evans, J. R. G. (2010). Biological evaluation of solid freeformed, hard tissue scaffolds for orthopedic applications. J APPL BIOMATER BIOM 8(2), 89-96
    • Herath, H. M. T. U., Di Silvio, L., Evans, J. R. G. (2010). In vitro evaluation of samarium (III) oxide as a bone substituting material. J BIOMED MATER RES A 94A(1), 130-136 doi:10.1002/jbm.a.32667.
    • Lee, Y., Lu, X., Hao, Y., Yang, S., Evans, J. R. G., Parini, C. G. (2010). Narrow-beam azimuthally omni-directional millimetre-wave antenna using freeformed cylindrical woodpile cavity. IET MICROWAVES ANTENNAS & PROPAGATION. ( Vol. 4 pp.1491-1499). INST ENGINEERING TECHNOLOGY-IET.
    • Lin, T., Kellici, S., Gong, K., Thompson, K., Evans, J. R., Wang, X., Darr, J. A. (2010). Rapid Automated Materials Synthesis Instrument: Exploring the Composition and Heat-Treatment of Nanoprecursors Toward Low Temperature Red Phosphors. J Comb Chem 12(3), 383-392 doi:10.1021/cc9001108. Author URL
    • Lu, X. S., Lee, Y., Yang, S. F., Hao, Y., Evans, J. R. G., Parini, C. G. (2010). Solvent-based paste extrusion solid freeforming. J EUR CERAM SOC 30(1), 1-10 doi:10.1016/j.jeurceramsoc.2009.07.019.
    • Saeed, F. A., Evans, J. R. G. (2010). Measurement of diffuse reflectance from combinatorial samples. ANAL CHIM ACTA 677(1), 79-89 doi:10.1016/j.aca.2010.07.007.
    • Yang, H. Y., Chi, X. P., Yang, S., Evans, J. R. G. (2010). Mechanical strength of extrusion freeformed calcium phosphate filaments. J MATER SCI-MATER M 21(5), 1503-1510 doi:10.1007/s10856-010-4009-5.
    • Zhang, Y. M., Evans, J. R. G., Yang, S. (2010). The prediction of solid solubility of alloys: Developments and applications of Hume-Rothery’s rules. Journal of Crystallization Physics and Chemistry 1, 81-97
    • Zhang, Y. M., Evans, J. R. G., Yang, S. F. (2010). Detection of material property errors in handbooks and databases using artificial neural networks with hidden correlations. PHILOS MAG 90(33), 4453-4474 doi:10.1080/14786435.2010.510452.

    2009

    • Chen, B., Evans, J. R. G. (2009). Impact strength of polymer-clay nanocomposites. Soft Matter 5(19), 3572-3584 doi:10.1039/b902073j.
    • Chen, L. F., Evans, J. R. G. (2009). Arched Structures Created by Colloidal Droplets as They Dry. Langmuir 25(19), 11299-11301 doi:10.1021/la902918m.
    • Evans, J. R. G. (2009). Microextrusion freeforming is the solution; what was the problem? 6th Millimetre-wave Users Group Meeting, National Physical Laboratory, Teddington, UK.
    • Lee, Y. J., Hao, Y., Parini, C. G., Lu, X., Yang, S., Evans, J. R. G. (2009). Cylindrical EBG antenna for short range gigabit wireless communications at millimetre-wave bands. Electronics Letters 45(3), 136-138 doi:10.1049/el:20093192.
    • Lee, Y., Lu, X. S., Hao, Y., Yang, S. F., Evans, J. R. G., Parini, C. G. (2009). Low-Profile Directive Millimeter-Wave Antennas Using Free-Formed Three-Dimensional (3-D) Electromagnetic Bandgap Structures. IEEE T ANTENN PROPAG 57(10), 2893-2903 doi:10.1109/TAP.2009.2029299.
    • Lee, Y., Lu, X., Hao, Y., Yang, S., Parini, C. G., Evans, J. R. G. (2009). Cylindrical EBG antenna for short range gigabit wireless communications at millimetre-wave bands. ELECTRON LETT 45(3), 136-138 doi:10.1049/el:20093192.
    • Lu, X. S., Lee, Y., Yang, S. F., Evans, J. R. G., Parini, C. G. (2009). Fabrication and evaluation of solid freeformed electromagnetic bandgap structures. Journal of Physics D: Applied Physics 42(14), 145107- doi:10.1088/0022-3727/42/14/145107.
    • Lu, X., Lee, Y. J., Hao, Y., Evans, J. R. G., Parini, C. G. (2009). Fabrication of Millimeter-Wave Electromagnetic Bandgap Crystals Using Microwave Dielectric Powders. Journal of the American Ceramic Society 92, 371-378
    • Lu, X., Lee, Y. J., Yang, S., Hao, Y., Evans, J. R. G., Parini, C. G. (2009). Fine lattice structures fabricated by extrusion freeforming: Process variables. Journal of Materials Processing Technology 209(10), 4654-4661 doi:10.1016/j.jmatprotec.2008.11.039.
    • Lu, X., Lee, Y., Yang, S., Hao, Y., Evans, J. R. G., Parini, C. G. (2009). Fabrication and evaluation of solid freeformed electromagnetic bandgap structures. Rapid Protoyping Journal 15, 42-51 doi:10.1088/0022-3727/42/14/145107.
    • Lu, X., Yang, S., Evans, J. R. G. (2009). Microfeeding with different ultrasonic nozzle designs. Ultrasonics 49(6-7), 514-521 doi:10.1016/j.ultras.2009.01.003.
    • Weng, X., Cockcroft, J. K., Hyett, G., Vickers, M., Boldrin, P., Tang, C. C., Thompson, S. P., Parker, J. E., Knowles, J. C., Rehman, I., Parkin, I., Evans, J. R. G., Darr, J. A. (2009). High-Throughput Continuous Hydrothermal Synthesis of an Entire Nanoceramic Phase Diagram. Journal of Combinatorial Chemistry 11(5), 829-834
    • Weng, X., Perston, B., Wang, X. Z., Abrahams, I., Lin, T., Yang, S., Evans, J. R. G., Morgan, D. J., Carley, A. F., Bowker, M., Knowles, J. C., Rehman, I., Darr, J. A. (2009). Synthesis and characterization of doped nano-sized ceria-zirconia solid solutions. Applied Catalysis B: Environmental 90(3-4), 405-415 doi:10.1016/j.apcatb.2009.03.031.
    • Yang, S., Lu, X., Lee, Y., Hao, Y., Evans, J. R. G., Parini, C. G. (2009). Metamaterials fabrication by solid freeform fabrication (Invited lecture). International Conference on Advances in Functional Materials, 8-12 June, Jiuzhaiguo, P.R.China..
    • Zhang, Z. C., Brown, S., Goodhall, J. B. M., Weng, X. L., Thompson, K., Gong, K. N., Kellici, S., Clark, R. J. H., Evans, J. R. G., Darr, J. A. (2009). Direct continuous hydrothermal synthesis of high surface area nanosized titania. Journal of Alloys and Compounds 476(1-2), 451-456 doi:10.1016/j.jallcom.2008.09.036.
    • Zhang, Z., Goodhall, J. B. M., Morgan, D. J., Brown, S., Clark, R. J. H., Knowles, J. C., Mordan, N. J., Evans, J. R. G., Carley, A. F., Bowker, M., Darr, J. A. (2009). Photocatalytic activities of N-doped nano-titanias and titanium nitride. Journal of the European Ceramic Society 29(11), 2343-2353

    2008

    • Chen, B. Q., Liu, S., Evans, J. R. G. (2008). Polymeric thermal actuation using laminates based on polymer-clay nanocomposites. Journal of Applied Polymer Science 109(3), 1480-1483 doi:10.1002/app.28224.
    • Chen, B., Evans, J. R. G. (2008). Impact and tensile energies of fracture in polymer-clay nanocomposites. Polymer 49(23), 5113-5118 doi:10.1016/j.polymer.2008.09.024.
    • Chen, B., Evans, J. R. G., Greenwell, H. C., Boulet, P., Coveney, P. V., Bowden, A. A., Whiting, A. (2008). A critical appraisal of polymer-clay nanocomposites. Chemical Society Reviews 37, 568-594 doi:10.1039/b702653f.
    • Evans, J. R. G. (2008). Fabrication of electromagnetic crystals by extrusion freeforming. Metamaterials 2(1), 36-44 doi:10.1016/j.metmat.2007.12.001.
    • Evans, J. R. G. (2008). Seventy ways to make ceramics. Journal of the European Ceramic Society 28, 1421-1432
    • Evans, J. R. G. (2008). Shape changes during the drying of droplets of suspensions. Langmuir 24(8), 3752-3758 doi:10.1021/la703484w.
    • Evans, J. R. G., Edirisinghe, M. J., Ford, I. (2008). Adjustment of aerosol seasalt concentration: A preliminary look at technical strategies. Annual Aerosol Conference (The Aerosol society).
    • Evans, J. R. G., Yang, S. (2008). Solid freeforming and combinatorial research at University of London. International Conference on Rapid Prototyping and Biomaterials, Nov. 2008 Beijing. Proc. ICRPM-BM 08 Tsinghua Univ. Nov. 2008.
    • Lee, Y., Lu, X. S., Hao, Y., Parini, C. G., Evans, J. R. G. (2008). Directive millimetre wave antennas using freeformed ceramic matamaterials in planar and cylindrical forms. IEEE Antennas and Propagation Society International Symposium. ( Vol. 1-9 pp.2242-2245).
    • Lee, Y., Lu, X., Hao, Y., Yang, S., Evans, J. R. G., Parini, C. G. (2008). Beam shaping of millimetre wave antennas using freeformed ceramic materials. META 08.
    • Liu, T., Chen, B., Evans, J. (2008). Ordered assemblies of clay nano-platelets. Bioinspiration and Biomimetics 3(1), 016005- doi:10.1088/1748-3182/3/1/016005.
    • Lu, X. S., Yang, S. F., Evans, J. R. G. (2008). Ultrasound-assisted microfeeding of fine powders. Particuology 6, 2-8
    • Rossiniy, J. C. H., Julis, J., Fearn, S., Kilner, J. A., Evans, J. R. G. (2008). Combinatorial characterisation of mixed conducting perovskites. Solid State Ionics 179, 1085-1089 doi:10.1016/j.ssi.2008.01.098.
    • Scott, D. J., Manos, S., Coveney, P. V., Rossiny, J. C., Fearn, S., Kilner, J. A., Pullar, R. C., Alford, N. M., Axelsson, A. K., Zhang, Y., Chen, L., Yang, S., Evans, J. R., Sebastian, M. T. (2008). Functional ceramic materials database: An online resource for materials research. J Chem Inf Model 48(2), 449-455 doi:10.1021/ci700270v. Author URL
    • Scott, D. J., Manos, S., Coveney, P. V., Rossiny, S., Fearn, S., Kilner, J. A., Pullar, R. C., Alford, N. M., Axelsson, A. -. K., Zhang, Y., Chen, L., Yang, S., Evans, J. R. G., Sebastian, M. T. (2008). Functional ceramics materials database: An online resource for materials research. Journal of Chemical Information and Modeling 48(2), 449-455 doi:10.1021/ci700270v.
    • Yang, H. Y., Chi, X. P., Yang, S., Evans, J. R. G. (2008). Rapid prototyping of ceramic lattices for hard tissue scaffolds. Materials and Design 29, 1802-1809
    • Yang, H. Y., Thompson, I., Yang, S. F., Chi, X. P., Evans, J. R. G., Cook, R. J., Robinson, P. (2008). Dissolution characteristics of extrusion freeformed hydroxyapatite-tricalcium phosphate scaffolds. Journal of Materials Science: Materials in Medicine 19(11), 3345-3353 doi:10.1007/s10856-008-3473-7.
    • Yang, H. Y., Yang, S. F., Chi, X. P., Evans, J. R. G., Thompson, I., Cook, R. J., Robinson, P. (2008). Sintering behaviour of calcium phosphate filaments for use as hard tissue scaffolds. Journal of the European Ceramic Society 28, 159-167
    • Yang, S., Mohebi, M. M., Evans, J. R. G. (2008). A novel solid freeforming method using simultaneous part and mould construction. Rapid Prototyping Journal 14, 35-43
    • Zhang, Y. M., Yang, S., Evans, J. R. G. (2008). Revisiting Hume-Rothery's rules with an artificial neural network. Acta materialia 56(5), 1094-1105 doi:10.1016/j.actamat.2007.10.059.

    2007

    • Boulet, P., Greenwell, H. C., Chen, B., Bowden, A. A., Beurroies, I., Salles, F., Coveney, P. V., Evans, J. R. G., Whiting, A. (2007). Large scale simulations of poly(propylene oxide) amine/Na+-montmorillonite using a molecular dynamics approach. Studies in Surface Science and Catalysis 160, 311-318
    • Chen, B., Evans, J. R. G. (2007). Enhancement of recycled polymer blends using nanoclays. ICEM8 : 8th International Conference on Eco-materials, Brunel University, July, 2007..
    • Chen, L., Zhang, Y., Yang, S., Evans, J. R. G. (2007). Protocols for printing thick film ceramic libraries using the London University Search Instrument. Review of Scientific Instruments 78(7), Article No- doi:10.1063/1.2755469.
    • Lee, Y. J., Lu, X. S., Hao, Y., Yang, S., Parini, C. G., Evans, J. R. G. (2007). Rapid prototyping of ceramic millimeterwave metamaterials: Simulations and experiments. Microwave and Optical Technology Letters 49(9), 2090-2093 doi:10.1002/mop.22697.
    • Lee, Y., Lu, X., Hao, Y., Yang, S., Ubic, R., Evans, J. R. G., Parini, C. G. (2007). A directive millimetre wave antenna based on freeformed woodpile EBG structures. Electronics Letters 43, 195-196 doi:10.1049/el:20073798.
    • Lu, X. S., Yang, S. F., Evans, J. R. G. (2007). Dose uniformity of fine powders in ultrasonic microfeeding. Powder Technology 175(2), 63-72 doi:10.1016/j.powtec.2007.01.029.
    • Pullar, R. C., Zhang, Y., Chen, L., Yang, S., Evans, J. R. G., Petrov, P., Alford, N. M. (2007). Manufacture and measurement of combinatorial libraries of dielectric ceramics Pt II: Dielectric measurements of Ba1-xSrxTiO3 libraries. Journal of the European Ceramic Society 27(16), 4437-4443 doi:10.1016/j.jeurceramsoc.2007.04.008.
    • Pullar, R. C., Zhang, Y., Chen, L., Yang, S., Evans, J. R. G., Petrov, P., Alford, N. M. (2007). Manufacture and measurement of combinatorial libraries, Pt I: Physical characterisation of Ba1-xSrxTiO3 libraries. Journal of the European Ceramic Society 27(13-15), 3861-3865 doi:10.1016/j.jeurceramsoc.2007.02.114.
    • Rossiniy, J. C. H., Fearn, S., Kilner, J. A., Zhang, Y., Chen, L., Evans, J. R. G., Yates, K., Cohen, L. (2007). Characterisation of combinatorial libraries of perovskite materials for SOFC cathode applications. SOFC-X Tenth International Symposium on Solid Oxide Fuel Cells, Nara, Japan, June 2007.
    • Yang, S. E., J, R. G. (2007). Metering and dispensing of powder; the quest for new solid freeforming techniques. Powder Technology 178(1), 56-72 doi:10.1016/j.powtec.2007.04.004.
    • Zhang, Y., Chen, L. F., Yang, S. F., Evans, J. R. G. (2007). Thick Film Ceramic Combinatorial Libraries: The Substrate Problem. QSAR and Combinatorial Science 26(10), 1036-1045 doi:10.1002/qsar.200620162.
    • Zhang, Y., Yang, S., Evans, J. R. G. (2007). Control of particle segregation during drying of ceramic suspension droplets. Journal of the European Ceramic Society 27(5), 2229-2235 doi:10.1016/j.jeurceramsoc.2006.07.019.

    2006

    • Bowden, A. A., Boulet, P., Greenwell, H. C., Chen, B., Evans, J. R. G., Coveney, P. V., Whiting, A. (2006). Intercalation and in situ polymerization of poly(alkylene oxide) derivatives within M+-montmorillonite (M = Li, Na, K). Journal of Materials Chemistry 16, 1082-1094
    • Chen, B., Evans, J. R. G. (2006). Elastic moduli of clay platelets. Scripta Materialia 54(9), 1581-1585 doi:10.1016/j.scriptamat.2006.01.018.
    • Chen, B., Evans, J. R. G. (2006). Nominal and Effective Volume Fractions in Polymer−Clay Nanocomposites. Macromolecules 39, 1790-1796 doi:10.1021/ma0522460.
    • Chen, B., Evans, J. R. G. (2006). Poly(ε-caprolactone)−Clay Nanocomposites:  Structure and Mechanical Properties. Macromolecules 39(2), 747-754 doi:10.1021/ma052154a.
    • Chen, B., Liu, S., Evans, J. R. G. (2006). Novel polymeric thermal actuators based on polymer-clay nanocomposites. Chinese Polymer Symposium, Sichuan, P.R.China (Chinese Chem. Soc.; Chinese Mech. Eng. Soc.; Chinese Mater. Res. Soc.)October, 2006..
    • Chi, X., Yang, H. Y., Yang, S., Evans, J. R. G. (2006). Direct extrusion freeforming of ceramic pastes. Solid Freeform Fabrication Proceedings. ( pp.304-315). Austin, Texas, USA University of Texas at Austin.
    • Jones, J., Robinson, P. D., Cook, R. J., Odell, E., Thompson, I., Yang, H. Y., Yang, S., Chi, X. P., Evans, J. R. G. (2006). Ceramic lattices for bone repair. 84th General Session of the International Association for Dental Research (IADR), Brisbane, June/July, 2006..
    • Lu, X., Yang, S., Chen, L., Evans, J. R. G. (2006). Dry powder microfeeding system for solid freeform fabrication. 17th Solid Freeform Fabrication Symposium, Austin, Texas, USA, August 14-16th 2006.
    • Lu, X., Yang, S., Evans, J. R. G. (2006). Studies on ultrasonic microfeeding of fine powders. Journal of Applied Physics D: Applied Physics 39, 2444-2453 doi:10.1088/0022-3727/39/11/020.
    • Mohebi, M. M., Yang, S., Evans, J. R. G. (2006). Computer generation of metal components by simultaneous deposition of mould, cores and part. 17th Solid Freeform Fabrication Symposium, Austin Texas, USA, 14-16th August 2006.
    • Wang, J., Evans, J. R. G. (2006). Segregation in multicomponent ceramic colloids during drying of droplets. Physical Review E 73, 021501- doi:10.1103/PhysRevE.73.021501.
    • Yang, H. Y., Yang, S., Chi, X. P., Evans, J. R. G. (2006). Ceramic lattices prepared by extrusion freeforming. Institute of Materials, Minerals and Mining Congress, London, April 2006.
    • Yang, H. Y., Yang, S., Chi, X. P., Evans, J. R. G. (2006). Fine ceramic lattices prepared by extrusion freeforming. Journal of Biomedical Materials Research Part B: Applied Biomaterials 79B(1), 116-121 doi:10.1002/jbm.b.30520.
    • Zhang, Y., Chen, L., Yang, S., Evans, J. R. G. (2006). Preparation of Ceramic Well Plates for Combinatorial Methods Using the Morphogenic Effects of Droplet Drying. Journal of the American Ceramic Society 89, 3858-3860 doi:10.1111/j.1551-2916.2006.01301.x.

    2005

    • Chen, B., Bowden, A. A., Greenwell, H. C., Boulet, P., Coveney, P. V., Whiting, A., Evans, J. R. G. (2005). Morphology and elastic modulus of novel poly[oligo(ethylene glycol) diacrylate]-montmorillonite nanocomposites. Journal of Polymer Science Part B: Polymer Physics 43, 1785-1793
    • Chen, B., Evans, J. R. G. (2005). Novel thermoplastic starch–clay nanocomposite foams. Nanotechnology 16, 2334-2337 doi:10.1088/0957-4484/16/10/056.
    • Chen, B., Evans, J. R. G. (2005). On the thermodynamic driving force for polymer intercalation in smectite clays. Philosophical Magazine 85(14), 1519-1538 doi:10.1080/14786430500036298.
    • Chen, B., Evans, J. R. G. (2005). Thermoplastic starch–clay nanocomposites and their characteristics. Carbohydrate Polymers 61, 455-463 doi:10.1016/j.carbpol.2005.06.020.
    • Chen, B., Evans, J. R. G. (2005). Volume fraction-property relationships in polymer-clay nanocomposites. ICCE-12:12th International Conference on Composites/Nano Engineering, Tenerife, Spain, August 2005..
    • Chen, B., Evans, J. R. G. (2005). X-ray diffraction studies and phase volume determinations in poly(ethylene glycol)-montmorillonite nanocomposites. Polymer International 54, 807-813 doi:10.1002/pi.1774.
    • Gomes de Sousa, F. C., Evans, J. R. G. (2005). Tubular hydroxyapatite scaffolds. Advances in Applied Ceramics 104, 30-34
    • Herath, H. M. T. U., DiSilvio, L., Evans, J. R. G. (2005). Porous hydroxyapatite ceramics for tissue engineering. Journal of Applied Biomaterials and Biomechanics 3, 192-198
    • Herath, H. M. T. U., DiSilvio, L., Evans, J. R. G. (2005). Scandia—A potential biomaterial? Journal of Materials Science: Materials in Medicine 16, 1061-1065
    • Mohebi, M. M., Evans, J. R. G. (2005). The trajectory of ink-jet droplets: Modelling and experiment. Chemical Engineering and Science 60(13), 3469-3476 doi:10.1016/j.ces.2005.01.036.
    • Wang, J., Evans, J. R. G. (2005). Library Preparation using an Aspirating-Dispensing Ink-Jet Printer for Combinatorial Studies in Ceramics. Journal of Materials Research 20, 2733-2740
    • Wang, J., Evans, J. R. G. (2005). London University Search Instrument:  A Combinatorial Robot for High-Throughput Methods in Ceramic Science. Journal of Combinatorial Chemistry 7, 665-672
    • Wang, J., Mohebi, M. M., Evans, J. R. G. (2005). Contents: Macromol. Rapid Commun. 4/2005. Macromolecular Rapid Communications 26, 207-212 doi:10.1002/marc.200590007.
    • Yang, S., Evans, J. R. G. (2005). . Materials Science Forum. ( Vol. 492-493 pp.749-754).
    • Yang, S., Evans, J. R. G. (2005). Acoustic initiation of powder flow in capillaries. Chemical Engineering and Science 60(2), 413-421 doi:10.1016/j.ces.2004.07.124.
    • Yang, S., Evans, J. R. G. (2005). Flow rate of metal powders at reduced and elevated air pressure. Powder Technology 154, 95-98 doi:10.1016/j.powtec.2005.04.038.
    • Yang, S., Evans, J. R. G. (2005). On the rate of descent of powder in a vibrating capillary. Philosophical Magazine 85, 1089-1109 doi:10.1080/14786430512331325598.

    2004

    • Bowden, A. A., Whiting, A., Coveney, P. V., Evans, J. R. G., Greenwell, H. C., Boulet, P., Chen, B. (2004). ATRP polymerized PEG-methyl ether methacrylate-montmorillonite nanocomposites. Abstracts of Papers of the American Chemical Society. ( Vol. 228 pp.446-).
    • Bowden, A. A., Whiting, A., Coveney, P. V., Evans, J. R. G., Greenwell, H. C., Boulet, P., Chen, B. Q. (2004). ATRP polymerized PEG-methyl ether methacrylatemontmorillonite nanocomposites. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY. ( Vol. 228 pp.U497-U497). AMER CHEMICAL SOC.
    • Chen, B., Evans, J. R. G. (2004). Decomposition of polyethylene glycol in nanocomposites. Journal of Applied Polymer Science 94, 548-552
    • Chen, B., Evans, J. R. G. (2004). Preferential intercalation of high molecular mass polymer in clay. The Journal of Physical Chemistry B 108, 14986-14990 doi:10.1021/jp040312e.
    • Mohebi, M. M., Yang, S., Evans, J. R. G. (2004). Compositional control in solid fereeforming: fabrication of £D FGM. Key Engineering Materials. ( Vol. 317-318 pp.151-154). Trans Tech Publ..
    • Xie, S., Evans, J. R. G. (2004). High porosity copper foam. Journal of Materials Science Letters 39, 5877-5880
    • Yang, S., Evans, J. R. G. (2004). A dry powder jet printer for dispensing and combinatorial research. Powder Technology 142, 219-222 doi:10.1016/j.powtec.2004.05.005.
    • Yang, S., Evans, J. R. G. (2004). A multicomponent powder dispensing system for three dimensional functional gradients. Materials Science and Engineering: A A379, 351-359
    • Yang, S., Evans, J. R. G. (2004). Acoustic control of powder dispensing in open tubes. Powder Technology 139, 55-60 doi:10.1016/j.powtec.2003.10.008.
    • Yang, S., Evans, J. R. G. (2004). Device for Preparing Combinatorial Libraries in Powder Metallurgy. Journal of Combinatorial Chemistry 6, 549-555
    • Zhang, Y., Yang, S., Evans, J. R. G. (2004). Solid Freeforming of Braille Patterns on Clay Products. Journal of the American Ceramic Society 87, 2301-2304 doi:10.1111/j.1151-2916.2004.tb07511.x.

    2003

    • Boulet, P., Greenwell, H. C., Coveney, P. V., Bowden, A. A., Whiting, A., Chen, B. Q., Evans, J. R. G. (2003). Large-scale simulations of propylene oxide amine-Na+ montmorillonite and propylene oxide ammonium Na+ montmorillonite using a MD approach. International Conference on Nanomaterials and Nanomanufacturing, IoMMM, London, December 2003.
    • Bowden, A. A., Boulet, P., Greenwell, H. C., Chen, B. Q., Evans, J. R. G., Coveney, P. V. (2003). Cation exchanged montmorillonite-polyalkylene oxide nanocomposites. International Conference on Nanomaterials and Nanomanufacturing, IoMMM, London, December 2003.
    • Chen, B. Q., Evans, J. R. G., Greenwell, H. C., Bowden, A. A., Boulet, P., Coveney, P. V., Whiting, A. (2003). Polymer-clay nanocomposites: synthesis, processing and testing. International Conference on Nanomaterials and Nanomanufacturing, IoMMM, London, December 2003.
    • Gomes de Sousa, F. C., Evans, J. R. G. (2003). Sintered Hydroxyapatite Latticework for Bone Substitute. Journal of the American Ceramic Society 86, 517-519
    • Grida, I., Evans, J. R. G. (2003). Extrusion freeforming of ceramics through fine nozzles. Journal of the European Ceramic Society 23, 629-635
    • Krug, S., Evans, J. R. G., Blomacher, M., ter Maat, J. H. H. (2003). Methods of assessing the time to remove binder from powder injection mouldings. International Journal of Powder Metallurgy 39(6), 35-43
    • Mohebi, M. M., Evans, J. R. G. (2003). Combinatorial Ink-Jet Printer for Ceramics: Calibration. Journal of the American Ceramic Society 86(10), 1654-1661 doi:10.1111/j.1151-2916.
    • Tay, B. Y., Evans, J. R. G., Edirisinghe, M. J. (2003). Solid freeform fabrication of ceramics. International Materials Reviews 48(6), 341-370 doi:10.1179/095066003225010263.
    • Yang, S., Evans, J. R. G. (2003). Computer control of powder flow for solid freeforming by acoustic modulation. Powder Technology 133, 251-254 doi:10.1016/S0032-5910(03)00088-3.
    • Zhao, X., Evans, J. R. G., Edirisinghe, M. J., Song, J. H. (2003). Formulation of a ceramic ink for a wide-array drop-on-demand ink-jet printer. Ceramics International 29(8), 887-892 doi:10.1016/S0272-8842(03)00032-4.

    2002

    • Ebaretonbofa, E., Evans, J. R. G. (2002). High porosity foam scaffolds for bone substitute. Journal of Porous Materials 9, 257-263
    • Herath, H. M. T. U., DiSilvio, L., Edirisinghe, M. J., Evans, J. R. G. (2002). Scandia- a novel biomaterial. 17th European Society for Biomaterials Annual Conference, 2002, Barcelona, Spain..
    • Krug, S., Evans, J. R. G., TerMaat, J. H. H. (2002). Differential sintering in ceramic injection moulding. Journal of the European Ceramic Society 22, 173-181
    • Krug, S., Evans, J. R. G., TerMaat, J. H. H. (2002). Packing and solidification in ceramic injection moulding. Journal of Materials Research 16, 1829-1837
    • Krug, S., Evans, J. R. G., TerMaat, J. H. H. (2002). Reaction and transport kinetics for depolymerization within a porous body. American Institute of Chemical Engineers Journal 48, 1533-1541
    • Krug, S., Evans, J. R. G., TerMaat, J. H. H. (2002). Solidification of large section ceramic injection mouldings under low pressure. Journal of Materials Science 37, 2835-2841
    • Leyland, N. S., Evans, J. R. G. (2002). Lithographic printing of ceramics. Journal of the European Ceramic Society 22, 1-13
    • Leyland, N. S., Evans, J. R. G., Harrison, D. J. (2002). Lithographic printing of force-sensitive resistors. Journal of Materials Science: Materials in Electronics 13, 387-390
    • Mohebi, M. M., Evans, J. R. G. (2002). A Drop-on-Demand Ink-Jet Printer for Combinatorial Libraries and Functionally Graded Ceramics. Journal of Combinatorial Chemistry 4, 267-274
    • Mohebi, M. M., Evans, J. R. G. (2002). Approaches to combinatorial methods of discovery in ceramic science. Materials Congress 2002, 9-11th April. Institute of Materials, London.
    • Mohebi, M. M., Evans, J. R. G. (2002). Functional gradients and combinatorial libraries using an ink-jet printer. 104th Annual Meeting of the American Ceramic Society, St.Louis, April 2002.
    • Mohebi, M. M., Evans, J. R. G. (2002). Solid freeforming of functionally graded materials and combinatorial libraries. Journal of Tsinghua University. ( Vol. 42 pp.298-303). Tsinghua University, Beijing China.
    • Nur, H. M., Song, J. H., Evans, J. R. G., Edirisinghe, M. J. (2002). Ink-jet printing of gold conductive tracks. Journal of Materials Science: Materials in Electronics 13, 213-219
    • Peng, H. X., Fan, Z., Mudher, D. S., Evans, J. R. G. (2002). Microstructures and mechanical properties of engineered short fibre reinforced aluminium matrix composites. Materials Science and Engineering: A 335A, 207-216
    • Yang, S., Evans, J. R. G. (2002). Acoustically induced powder dispensing and metering. 2nd International Conference on Progress in Rapid Prototyping and Manufacturing, 2002, Beijing, China. ( pp.355-359). Tsinghua University Press.
    • Zhao, X., Evans, J. R. G., Edirisinghe, M. J., Song, J. H. (2002). Direct ink-jet printing of vertical walls. Journal of the American Ceramic Society 85, 2113-2115
    • Zhao, X., Evans, J. R. G., Edirisinghe, M. J., Song, J. H. (2002). Ink-jet printing of ceramic pillar arrays. Journal of Materials Science 37, 1987-1992

    2001

    • Bhatti, A. R., Mott, M., Evans, J. R. G., Edirisinghe, M. J. (2001). PZT pillars for 1-3 composites prepared by ink-jet printing. Journal of Materials Science Letters 20, 1245-1248
    • Evans, J. R. G. (2001). Ink-jet printing of ceramics; an experiment in teleology. British Ceramic Transactions 100, 124-128
    • Evans, J. R. G. (2001). New applications for the ink-jet printer. 2nd Workshop on Materials Opportunities in Layered Manufacturing, UMIST, Manchester UK, June 4-6 2001.
    • Evans, J. R. G., Edirisinghe, M. J., Coveney, P. V., Eames, J. (2001). Combinatorial searches of inorganic materials using the ink jet printer: science, philosophy and technology. Journal of the European Ceramic Society 21, 2291-2299
    • Grigoriev, D. A. E., M J, B., X, E., J R G, L., Z, B. (2001). Preparation of silicon carbide by electrospraying of a polymeric precursor. Philosophical Magazine Letters 81, 285-291
    • Grigoriev, D., Bao, X., Edirisinghe, M. J., Evans, J. R. G. (2001). Electrostatic atomization of polymeric precursors. 103rd Annual Meeting of the American Ceramic Society, April 2001.
    • Krug, S., Evans, J. R. G., TerMaat, J. H. H. (2001). Effect of Polymer Crystallinity on Morphology in Ceramic Injection Molding. Journal of the American Ceramic Society 84, 2750-2756
    • Krug, S., Evans, J. R. G., TerMaat, J. H. H. (2001). Transient effects during catalytic binder removal in ceramic injection moulding. Journal of the European Ceramic Society 21, 2275-2283
    • Leyland, N. S., Evans, J. R. G., Harrison, D. J. (2001). Flexible ceramic and metallic lithographic inks. British Ceramic Transactions 100, 274-278
    • Mott, M., Evans, J. R. G. (2001). Solid freeforming of silicon carbide by ink-jet printing using a polymeric precursor. Journal of the American Ceramic Society 84, 307-313
    • Peng, H. X., Fan, Z., Evans, J. R. G. (2001). Bicontinuous metal matrix composites. Materials Science and Engineering: A A303, 37-45
    • Peng, H. X., Fan, Z., Evans, J. R. G. (2001). Cellular arrays of ceramic fibres. Journal of Materials Science 36, 1007-1013
    • Peng, H. X., Fan, Z., Evans, J. R. G. (2001). Novel MMC microstructure with tailored distribution of the reinforcing phase. Journal of Microscopy 201, 333-338
    • Seerden, K. A. M., Reis, N., Evans, J. R. G., Grant, P. S., Halloran, J. W., Derby, B. (2001). Ink-Jet Printing of Wax-Based Alumina Suspensions. Journal of the American Ceramic Society 84, 2514-2520
    • Zhao, X., Evans, J. R. G., Edirisinghe, M. J., Song, J. H. (2001). Ceramic freeforming using an advanced multinozzle ink-jet printer. Journal of Materials Synthesis and Processing 9, 319-327

    2000

    • Blazdell, P. F., Evans, J. R. G. (2000). Application of a continuous ink jet printer to solid freeforming of ceramics. Journal of Materials Processing Technology 99, 94-102
    • Derby, B., Reis, N., Seerden, K., Grant, P. S., Evans, J. R. G. (2000). Freeform fabrication of ceramics by hot-melt ink-jet printing. Materials Research Society Fall Meeting, 2000.
    • EVANS, J. (2000). Freeforming of ceramics using paint and printing operations. Industrial Ceramics. ( Vol. 20 pp.99-102).
    • Evans, J. R. G. (2000). Progress in injection moulding large sections. 2nd European Symposium on Powder Injection Moulding, Munich, October 18-20, 2000.
    • Guo, Z. X., Jee, C. S. Y., Ozguven, N., Evans, J. R. G. (2000). Novel polymer–metal based method for open cell metal foams production. Materials Science and Technology 16, 776-780
    • Jee, C. S. Y., Ozguven, N., Guo, Z. X., Evans, J. R. G. (2000). Preparation of high porosity metal foams. Metallurgical and Materials Transactions B 31, 1345-1352 doi:10.1007/s11663-000-0021-3.
    • Krug, S., Evans, J. R. G., ter Maat, J. H. H. (2000). Defects in large ceramic injection mouldings. Proceedings of Processing and Fabrication of Advanced Materials. ( pp.1035-1042). World Scientific Publishing.
    • Krug, S., Evans, J. R. G., TerMaat, J. H. H. (2000). Residual stresses and cracking in large ceramic injection mouldings subjected to different solidification schedules. Journal of the European Ceramic Society 20, 2535-2541
    • Leyland, N. S., Evans, J. R. G. (2000). The microstructure of lithographically printed ceramic films. Supplement to Proceedings of the Royal Microscopical Society. ( Vol. 35 pp.3-).
    • Peng, H. X., Fan, Z., Evans, J. R. G. (2000). Factors affecting the microstructure of a fine ceramic foam. Ceramics International 26, 887-895
    • Peng, H. X., Fan, Z., Evans, J. R. G. (2000). Microstrucutres prepared by melt infiltration of reticulated ceranmic preforms. Materials Science and Technology 16, 903-907
    • Peng, H. X., Fan, Z., Evans, J. R. G., Busfield, J. J. C. (2000). Microstructure of ceramic foams. Journal of the European Ceramic Society 20, 807-813
    • Reis, N., Seerden, K. A. M., Grant, P. S., Evans, J. R. G., Derby, B. (2000). Ink-jet printing of alumina suspensions in liquid wax. Ceramic: from Processing to Production. ( Vol. 62 pp.39-47).
    • Song, J. H., Edirisinghe, M. J., Evans, J. R. G., Twizell, E. H. (2000). Optimisation of heating rates in thermolytic debinding of ceramics. Journal of Materials Research 15, 449-457

    1999

    • Blazdell, P., Evans, J. R. G. (1999). Preparation of ceramic inks for solid freeforming using a continuous inkjet printer. Journal of Materials Synthesis and Processing 7, 349-356
    • Evans, J. R. G., Greener, J. (1999). Elongational flow processing of ceramics. Journal of Materials Processing Technology 96, 143-150
    • Krug, S., Evans, J. R. G. (1999). Aetiology of defects in large section ceramic injection moulding. Journal of the American Ceramic Society 82, 2094-2100
    • Krug, S., Evans, J. R. G. (1999). Jetting and weld lines in ceramic injection moulding. British Ceramic Transactions 98, 178-181
    • Krug, S., Evans, J. R. G. (1999). Method of assessing gate solidification time in ceramic injection moulding. Ceramics International 25, 661-666
    • Miao, P., Huneiti, Z. A., Machowski, W., Balachandran, W., Xiao, P., Evans, J. R. G. (1999). Electrostatic atomization of ultrafine spray of ceramic sols. Inst. Physics Conf. Series Electrostatics 1999. ( Vol. 163 pp.119-122).
    • Mott, M., Evans, J. R. G. (1999). Zircinia/alumina functionally graded material made by inkjet printing. Materials Science and Engineering A A271, 344-352
    • Mott, M., Song, J. H., Evans, J. R. G. (1999). Microengineering of ceramics by direct inkjet printing. Journal of the American Ceramic Society 82, 1653-1658
    • Reis, N., Seerden, K. A. M., Derby, B., Halloran, J. W., Evans, J. R. G. (1999). Direct inkjet deposition of green bodies:II Jet behaviour and deposit formation. MRS Syposium Proceedings. ( Vol. 542 pp.147-152). Warrendale Pennsylvania MRS.
    • Seerden, K. A. M., Reis, N., Derby, B., Grant, P. S., Halloran, J. W., Evans, J. R. G. (1999). Direct inkjet deposition of ceramic green bodies: I formulation of build materials. MRS Symposium Proceedings. ( Vol. 542 pp.141-146). Warrendale Pennsylvania MRS.
    • Song, J. H., Edirisinghe, M. J., Evans, J. R. G. (1999). Formulation and multilayer jet printing of ceramic inks. Journal of the American Ceramic Society 82, 3374-3380
    • Tuck, C., Evans, J. R. G. (1999). Porous ceramics prepared from aqueous foams. Journal of Materials Science Letters 18, 1003-1005
    • Wright, M. J., Evans, J. R. G. (1999). Ceramic deposition using an electromagnetic jet printer station. Journal of Materials Science Letters 18, 99-101
    • Zhang, T., Evans, J. R. G., Bevis, M. J. (1999). Relaxation patterns in double-gated modulated pressure injection moulding. Journal of the European Ceramic Society 19, 411-417

    1998

    • Evans, J. R. G. (1998). Ceramic processing methods spanning nine orders of viscosity. Colloid Processing Symposium (Max Planck Institute).
    • Evans, J. R. G. (1998). Solid freeforming by direct inkjet printing. Materials Opportunities in Layered Manufacturing.
    • Greener, J., Evans, J. R. G. (1998). Uniaxial elongational flow of particle-filled polymer melts. Journal of Rheology 42, 697-709
    • Krug, S., Evans, J. R. G., ter Maat, J. H. H. (1998). Origin of defects in large ceramic injection mouldings. Powder Injection Moulding PIM-98.
    • Payne, C. E. A., Evans, J. R. G. (1998). Crossflow ceramic structures produced by plastic processing. International Journal of Advanced Manufacturing Technology 14, 508-513
    • Slade, C. E., Evans, J. R. G. (1998). Freeforming ceramics using a thermal inkjet printer. Journal of Materials Science Letters 17, 1669-1671
    • Song, J. H., Evans, J. R. G., Twizell, E. H., Edirisinghe, M. J. (1998). Multi-parameter mapping of polymer properties for ceramic injection moulding. Journal of Applied Polymer Science 70, 545-557
    • Williams, H. M., Evans, J. R. G., Schemilt, J. E., Edirisinghe, M. J. (1998). Film blowing of ceria electrolyte plates. Materials ansd Manufacturing Processes 13, 147-158
    • Zhang, T., Evans, J. R. G., Bevis, M. J. (1998). On the heat balance during double-gated modulated pressure injection moulding. International Journal of Heat and Mass Transfer 41, 963-974

    1997

    • Evans, J. R. G. (1997). From Injection Moulding to Micro-freeforming: 12 years of Ceramics Research at Brunel University. In Kent, R. (Ed.). International Ceramics ( pp.51-53). London Contract Communications.
    • Evans, J. R. G. (1997). Particle contact before firing. Journal of the European Ceramic Society 17, 161-169
    • Greener, J., Evans, J. R. G. (1997). Review: Measurement of elongational flows in ceramics processing. Journal of the European Ceramic Society 17, 1173-1183
    • Guy, R. C. E., Evans, J. R. G. (1997). Direct expansion of ceramic foams. British Ceramic Transactions 96, 165-169
    • Shemilt, J. E., Williams, H., Edirisinghe, M. J., Evans, J. R. G., Ralph, B. (1997). Fracture toughness of doped ceria ceramics. Scripta Materialia 36, 929-934
    • Song, J. H., Evans, J. R. G. (1997). On the machinability of ceramic compacts. Journal of the European Ceramic Society 17, 1665-1673
    • Teng, W. D., Edirisinghe, M. J., Evans, J. R. G. (1997). Optimization of dispersion and viscosity of a ceramic jet printing ink. Journal of the American Ceramic Society 80, 486-494
    • Teng, W. D., Huneiti, Z. A., Machowski, W., Evans, J. R. G., Edirisinghe, M. J., Balachandran, W. (1997). Towards particle-by-particle deposition of ceramics using electrostatic atomization. Journal of Materials Science Letters 16, 1017-1019
    • Xiang, Q. F., Evans, J. R. G., Edirisinghe, M. J., Blazdell, P. F. (1997). Solid freeforming of ceramics using a drop on demand jet printer. Proceedings of the Institute of Mechanical Engineers/ Journal of Engineering Manufacture 211B, 211-214
    • Zhang, T., Evans, J. R. G., Bevis, M. J. (1997). Analysis of open-ended injection moulding. Advances in Polymer Technology 16, 105-115
    • Zhang, T., Evans, J. R. G., Bevis, M. J. (1997). The control of fibre orientation in injection moulded ceramic composites. Composites Pt. A 28, 339-346

    1996

    • Blazdell, P. F., Xiang, Q. F., Edirisinghe, M. J., Evans, J. R. G. (1996). A 3D jet printing method for the production of multilayer devices. Materials Research Society Spring Meeting.
    • Evans, J. R. G. (1996). Injection Moulding. In Brook, R. J. (Ed.). Processing of Ceramics Part I ( Vol. 17A pp.267-311).
    • Evans, J. R. G. (1996). New manufacturing operations for engineering ceramics. Interceramex:Processing and Engineering in the Ceramics Industry.
    • Grove, R., Edirisinghe, M. J., Evans, J. R. G., Oscroft, R. J., Belfield, E. A. (1996). Flow behaviour of ceramic injection moulding suspensions:Effect of particle size distribution. World Congress on Powder Metallurgy and Particulate Materials PM2 96.
    • Matar, S. A., Edirisinghe, M. J., Evans, J. R. G., Twizell, E. H. (1996). Diffusion of degradation products in ceramic mouldings during pyrolysis: Effect of geometry. Journal of the American Ceramic Society 79, 749-755
    • Song, J. H., Edirisinghe, M. J., Evans, J. R. G. (1996). Mathematical modelling of binder removal from plastically formed engineering ceramics. Advances in Computational Mathematics 6, 325-331
    • Song, J. H., Edirisinghe, M. J., Evans, J. R. G., Twizell, E. H. (1996). Modelling the effect of gas transport on the formation of defects during thermolysis of powder mouldings. Journal of Materials Research 11, 830-840
    • Song, J. H., Evans, J. R. G. (1996). Ultrafine ceramic powder injection moulding. Journal of Rheology 40, 131-152
    • Song, J. H., Evans, J. R. G., Edirisinghe, M. J., Twizell, E. H. (1996). Determination of gas transport in ceramic bodies during thermolysis or organic additives. International Materials Reviews 41, 116-128
    • Song, J. H., Evans, J. R. G., Edirisinghe, M. J., Twizell, E. H. (1996). The effect of a powder bed on the critical heating rate for pyrolysis of ceramic injection moulded components. American Institute of Chemical Engineers Journal 42, 1715-1722
    • Teng, W. D., Blazdell, P. F., Xiang, Q. F., Huneiti, Z. A., Machowski, W. A., Evans, J. R. G., Edirisinghe, M. J., Balachandran, W. (1996). Solid freeform fabrication of ceramics. Science and Art in Ceramics.
    • Teng, W. D., Evans, J. R. G. (1996). Development of ceramic inks for 3D printing. American Ceramic Society : Rapid Prototyping Symposium.
    • Williams, E. J. A. E., Evans, J. R. G. (1996). Expanded ceramic foam. Journal of Materials Science 31, 559-563
    • Williams, H. M., Williams, C., Shemilt, J. E., Edirisinghe, M. J., Evans, J. R. G., Ralph, B. (1996). Processing and properties of doped ceria ceramics. Proceedings of the 2nd European Solid Oxide Fuel Cell Forum. ( Vol. 2B pp.783-792).
    • Willoughby, C., Evans, J. R. G. (1996). The preparation of laminated ceramic composites using paint technology. Journal of Materials Science 31, 2333-2337
    • Zhang, T., Evans, J. R. G., Bevis, M. J. (1996). The control of fibre orientation in ceramic and metal composites by open-ended injection moulding. Composites Science and Technology 56, 921-928
    • Zhang, T., Evans, J. R. G., Bevis, M. J. (1996). The control of orientation in short fibre reinforced metal matrix composites. Journal of Powder Metallurgy 32, 331-339

    1995

    • Blazdell, P. F., Evans, J. R. G., Edirisinghe, M. J., Shaw, P., Binstead, M. J. (1995). The computer aided manufacture of ceramics using multilayer jet printing. Journal of Materials Science Letters 14, 1562-1565
    • Hammond, P. D., Evans, J. R. G. (1995). The use of overpressure in thermolytic debinding of moulded ceramic bodies. Journal of the European Ceramic Society 15, 117-125
    • Hammond, P. D., Evans, J. R. G. (1995). Thermolytic debinding of ceramic mouldings using overpressure. Chemical Engineering and Science 50, 3187-3200
    • Matar, S. A., Edirisinghe, M. J., Evans, J. R. G., Twizell, E. H., Song, J. H. (1995). Modelling the removal of organic vehicle from ceramic or metal mouldings. Journal of Materials Science 30, 3805-3810
    • Matar, S. A., Evans, J. R. G., Edirisinghe, M. J., Twizell, E. H. (1995). The influence of monomer and polymer properties on the removal of organic vehicle from moulded ceramic bodies. Journal of Materials Research 10, 2060-2072
    • Powell, S. J., Evans, J. R. G. (1995). The structure of ceramic foams prepared from polyurethane ceramic suspensions. Materials and Manufacturing Processes 10, 757-771
    • Song, J. H., Evans, J. R. G. (1995). The injection moulding of fine and ultrafine zirconia powders. Ceramics International 21, 325-333
    • Song, J. H., Evans, J. R. G., Edirisinghe, M. J., Twizell, E. H. (1995). Pyrolytic binder removal from injection moulded ceramic components: Computer modelling of particle size effects on the critical heating rate. In Hawthorne, H. M., Troczynski, T. (Eds.). Advanced Ceramics for Structural and Tribological Applications ( pp.79-92). Montreal, Canada The Metallurgical Society of the Canadian Institute of Mining, Metallurgy and Petroleum.
    • Zhang, T., Evans, J. R. G., Woodthorpe, J. (1995). Injection moulding of silicon carbide using an organic vehicle based on a preceramic polymer. Journal of the European Ceramic Society 15, 729-734

    1994

    • Collishaw, P. G., Evans, J. R. G. (1994). An assessment of expressions for calculating the apparent thermal conductivity of cellular materials. Journal of Materials Science 29, 2261-2273
    • Dransfield, G., McColgan, P., Birkby, I., Song, J., Evans, J. R. G. (1994). Factors affecting the machinability of fine ceramics. British Ceramic Transactions and Journal 93, 183-186
    • EVANS, J. (1994). Ceramic Injection Moulding. In Bloor, D., Brook, R. J., Flemmings, M. C., Mahajan, S. (Eds.). Encycolpaedia of Advanced Ceramics ( pp.1100-1103). Oxford Pergamon.
    • Evans, J. R. G. (1994). Interfacial aspects of ceramic injection moulding. In Surface and Colloid Chemistry in Advanced Ceramic Processing ( Vol. 51 pp.309-351). NY Marcel Dekker.
    • Gil-Medina, E. M., Evans, J. R. G. (1994). Ceramic injection moulding: Some effects of powder volume fraction. Processing of Advanced Materials 4, 57-65
    • Song, J. H., Evans, J. R. G. (1994). A die pressing test for the estimation of agglomerate strength. Journal of the American Ceramic Society 77, 806-814
    • Song, J. H., Evans, J. R. G. (1994). Flocculation of ceramic suspensions after injection moulding. Journal of Materials Research 9, 2386-2397
    • Song, J. H., Evans, J. R. G. (1994). The effect of undispersed agglomerates on the relative viscosity of of ceramic injection moulding suspensions. Journal of Materials Science Letters 13, 1642-1644

    1993

    • Dransfield, G. P., Birkby, I., McColgan, P., Evans, J. R. G., Song, J. H. (1993). The manufacture of ceramic components from ultrafine oxide powders. Proceedings of the British Ceramic Society 51, 15-23
    • Evans, J. R. G. (1993). Plastics technology applied to ceramic suspensions. Proc. 4th Ceramitec Symp.. ( pp.81-106). Weisbaden D.K.G..
    • Fawcett-Jones, A., Evans, J. R. G., Edirisinghe, M. J. (1993). Diffusion measurements in ceramic-polymer suspensions. Proc. 1st Int.Symp. on Development and Applications of Ceramic and Metal Alloys. ( pp.331-332).
    • Greener, J., Evans, J. R. G. (1993). Film blowing of ceramics. Journal of Materials Science 28, 6190-6194
    • Hutton, T., Edirisinghe, M. J., Evans, J. R. G., Dyson, J. K., Cave, M. (1993). The Influence of Ceramic Technologies on CO2 Outputs from Land-based Transport Systems. Brunel University.
    • Kostic, B., Zhang, T., Evans, J. R. G. (1993). The effect of moulding conditions on residual stress in injection moulded ceramics. International Journal of Powder Metallurgy 29, 251-257
    • Matar, S. A., Edirisinghe, M. J., Evans, J. R. G., Twizell, E. H. (1993). The effect of porosity development on the removal of organic vehicle from ceramic and metal mouldings. Journal of Materials Research 8, 617-625
    • Song, J. H., Evans, J. R. G. (1993). Phase separation during the reheating of ceramic mouldings. Processing of Advanced Materials 3, 193-198
    • Song, J. H., Evans, J. R. G. (1993). The assessment of dispersion of fine ceramic powders for injection moulding and related processes. Journal of the European Ceramic Society 12, 467-478
    • Stedman, S. J., Evans, J. R. G., Brook, R. J., Hoffmann, M. J. (1993). Anisotropic sintering shrinkage in injection moulded composite ceramics. Journal of the European Ceramic Society 11, 523-532
    • Zhang, T., Evans, J. R. G. (1993). Computation of volume flow in modulated pressure ceramic injection moulding. Ceramics International 19, 367-373
    • Zhang, T., Evans, J. R. G. (1993). Predicting the incidence of voids in ceramic injection moulding. Journal of the American Ceramic Society 76, 481-486
    • Zhang, T., Evans, J. R. G. (1993). Relaxation effects in large injection moulded ceramic bodies. Journal of the European Ceramic Society 12, 51-59
    • Zhang, T., Evans, J. R. G. (1993). The solidification of large sections in ceramic injection moulding: I Conventional moulding. Journal of Materials Research 8, 187-194
    • Zhang, T., Evans, J. R. G. (1993). The solidification of large sections in ceramic injection moulding: II Modulated pressure moulding. Journal of Materials Research 8, 345-351
    • Zhang, T., Evans, J. R. G. (1993). The use of a heated sprue in the injection moulding of large ceramic sections. British Ceramic Transactions and Journal 92, 146-151

    1992

    • Evans, J. R. G. (1992). Acid-base Interactions. In Packham, D. E. (Ed.). Handbook of Adhesion ( pp.7-9). Harlow, UK Longmans.
    • Evans, J. R. G. (1992). Ceramic Injection Moulding and Related Processes. In Birkby, I. (Ed.). Ceramic Technology International ( pp.171-175). London Sterling Publications.
    • Evans, J. R. G. (1992). Filled Polymers. In Packham, D. E. (Ed.). Handbook of Adhesion ( pp.187-188). Harlow, UK Longmans.
    • Greener, J., Evans, J. R. G. (1992). Factors affecting the extensional flow of crowded suspensions for the manufacture of thin wall ceramic bodies. Proc. Mat. Res. Soc. Symp.. ( Vol. 289 pp.103-108).
    • Kostic, B., Zhang, T., Evans, J. R. G. (1992). The measurement of residual stress in injection moulded ceramics. Journal of the American Ceramic Society 75, 2773-2778
    • Zhang, T., Evans, J. R. G. (1992). The calculation of temperature distributions during the solidification stage in ceramic injection moulding. Journal of the American Ceramic Society 75, 2260-2267
    • Zhang, T., Evans, J. R. G. (1992). The heterogeneity of injection moulded ceramics. Proc. Int. Conf. IRC '92. ( pp.79-84). Birmingham, UK MCE Publications.
    • Zhang, T., Evans, J. R. G., Rees, D. W. A. (1992). The heating effect of electrical resistance strain gauges applied to polymeric materials. Strain 28, 107-112

    1991

    • Bao, Y., Evans, J. R. G. (1991). Kinetics of capillary extraction of organic vehicle from ceramic bodies I: Flow in porous media. Journal of the European Ceramic Society 8, 81-93
    • Bao, Y., Evans, J. R. G. (1991). Kinetics of capillary extraction of organic vehicle from ceramic bodies II: Partitioning between porous media. Journal of the European Ceramic Society 8, 95-105
    • Bao, Y., Evans, J. R. G. (1991). Kinetics of capillary extraction of organic vehicle from ceramic bodies. Journal of the European Ceramic Society 8, 81-93
    • Evans, J. R. G., Edirisinghe, M. J. (1991). Interfacial factors affecting the incidence of defects in ceramic mouldings. Journal of Materials Science 26, 2081-2088
    • Evans, J. R. G., Edirisinghe, M. J., Wright, J. K., Crank, J. (1991). On the removal of organic vehicle from moulded ceramic bodies. Proceedings of the Royal Society A 432, 321-340
    • Hammond, P. D., Evans, J. R. G. (1991). On the blow moulding of ceramics. Journal of Materials Science Letters 10, 294-296
    • Hunt, K. N., Evans, J. R. G. (1991). A heated sprue bush for ceramic injection moulding. Journal of Materials Science Letters 10, 730-733
    • Hunt, K. N., Evans, J. R. G. (1991). Computer modelling of the origins of defects in ceramic moulding III: Sprue closure. Journal of Materials Science 26, 2143-2149
    • Hunt, K. N., Evans, J. R. G., Mills, N. J., Woodthorpe, J. (1991). Computer modelling of the origins of defects in ceramic moulding IV: Residual stresses. Journal of Materials Science 26, 5229-5238
    • Hunt, K. N., Evans, J. R. G., Woodthorpe, J. (1991). Computer modelling of the origins of defects in ceramic moulding I: Measurement of thermal properties. Journal of Materials Science 26, 285-291
    • Hunt, K. N., Evans, J. R. G., Woodthorpe, J. (1991). Computer modelling of the origins of defects in ceramic moulding II: Shrinkage voids. Journal of Materials Science 26, 292-300
    • Rashid, H., Evans, J. R. G. (1991). Joining technical ceramics before firing by butt fusion welding. Ceramics International 17, 259-265
    • Rashid, H., Hunt, K. N., Evans, J. R. G. (1991). Joining ceramic before firing by ultrasonic welding. Journal of the European Ceramic Society 8, 329-338
    • Rashid, H., Lindsey, K., Evans, J. R. G. (1991). Joining ceramics before firing by solvent welding. Journal of the European Ceramic Society 7, 165-175
    • Wright, J. K., Evans, J. R. G. (1991). Kinetics of the oxidative degradation of ceramic injection moulding vehicle. Journal of Materials Science 26, 4897-4903
    • Wright, J. K., Evans, J. R. G. (1991). Removal of organic vehicle from moulded ceramics by capillary action. Ceramics International 17, 79-87
    • Zhang, T. (1991). The causes and prevention of injection moulding defects in large ceramic sections. Proc.4th Int. Symp.on Ceramic Materials and Components for Engines. ( pp.569-576). gotenberg, Sweden Swedish Ceramic Society.
    • Zhang, T., Evans, J. R. G. (1991). Mechanical properties of a ceramic injection moulding suspension as a function of temperature and ceramic volume fraction. Journal of the European Ceramic Society 7, 155-163
    • Zhang, T., Evans, J. R. G. (1991). Properties of a ceramic injection moulding suspension based on a preceramic polymer. Journal of the European Ceramic Society 7, 405-412

    1990

    • Evans, J. R. G. (1990). Injection Moulding of Fine Ceramics. In Binner, J. (Ed.). Advanced Ceramic Processing and Technology ( pp.215-254). New Jersey Noyes Publications.
    • Evans, J. R. G. (1990). Plastic forming operations for ceramic suspensions. New Materials and their Applications. ( pp.25-32).
    • Haunton, K. M., Wright, J. K., Evans, J. R. G. (1990). The vacuum forming of ceramcis. British Ceramic Transactions and Journal 89, 53-56
    • Stedman, S. J., Evans, J. R. G., Woodthorpe, J. (1990). A method for selecting organic materials for ceramic injection moulding. Ceramics International 16, 107-113
    • Stedman, S. J., Evans, J. R. G., Woodthorpe, J. (1990). Rheology of composite ceramic injection moulding suspensions. Journal of Materials Science 25, 1833-1841
    • Stedman, S. J., Evans, J. R. G., Woodthorpe, J. (1990). Whisker length degradation during the preparation of composite ceramics for injection moulding. Journal of Materials Science 25, 1025-1032
    • Wright, J. K., Edirisinghe, M. J., Zhang, J. G., Evans, J. R. G. (1990). Particle packing in ceramic injection moulding. Journal of the American Ceramic Society 73, 2653-2658
    • Wright, J. K., Evans, J. R. G. (1990). The manufacture of thin walled ceramic bodies from phenylmethylsilylene-dmethylsilylene copolymers (polysilastyrene). British Ceramic Transactions and Journal 89, 163-167
    • Wright, J. K., Thomson, R. M., Evans, J. R. G. (1990). On the fabrication of ceramic windings. Journal of Materials Science 25, 149-156
    • Zhang, T., Evans, J. R. G. (1990). Anomalies in the thermal expansion of ceramic injection moulding bodies. Journal of Materials Science Letters 9, 672-674
    • Zhang, T., Evans, J. R. G. (1990). Thermal expansion and equation of state for ceramic injection moulding suspensions. Journal of the European Ceramic Society 6, 15-21

    1989

    • Edirisinghe, M. J., Evans, J. R. G. (1989). Systematic development of the ceramic injection moulding process. Materials Science and Engineering A A109, 17-26
    • Stedman, S. J., Evans, J. R. G., Woodthorpe, J. (1989). Preparation of silicon nitride matrix composites for injection moulding. Proc. Conf. on Developments and Applications of Advanced Ceramics and P/M Materials.
    • Woodthorpe, J., Edirisinghe, M. J., Evans, J. R. G. (1989). Properties of ceramic injection moulding formulations III: Polymer removal. Journal of Materials Science 24, 1038-1048
    • Wright, J. K., Evans, J. R. G., Edirisinghe, M. J. (1989). Degradation of polyolefin blends used for ceramic injection moulding. Journal of the American Ceramic Society 72, 1822-1828
    • Zhang, J. G., Edirisinghe, M. J., Evans, J. R. G. (1989). A catalogue of ceramic injection moulding defects and their causes. Industrial Ceramics 9, 72-82
    • Zhang, J. G., Edirisinghe, M. J., Evans, J. R. G. (1989). On the dispersion of unary and binary ceramic powders in polymer blends. Proceedings of the British Ceramic Society 42, 91-99
    • Zhang, J. G., Edirisinghe, M. J., Evans, J. R. G. (1989). The control of sprue solidification time in ceramic injection moulding. Journal of Materials Science 24, 840-848
    • Zhang, J. G., Edirisinghe, M. J., Evans, J. R. G. (1989). The use of modulated pressure in ceramic injection moulding. Journal of the European Ceramic Society 5, 63-72
    • Zhang, T., Evans, J. R. G. (1989). Predicting the viscosity of ceramic injection moulding suspensions. Journal of the European Ceramic Society 5, 165-172
    • Zhang, T., Evans, J. R. G., Dutta, K. K. (1989). Thermal properties of ceramic injection moulding suspensions. Journal of the European Ceramic Society 5, 303-309

    1988

    • Edirisinghe, M. J., Zhang, J. G., Evans, J. R. G. (1988). An oscillating pressure unit for ceramic injection moulding Part B. Materials and Design 9, 85-93
    • Evans, J. R. G. (1988). Academic research on ceramic injection moulding. Proc. 1st European Conf. on Metal, Ceramic and Cemented Carbide Injection Moulding.
    • Hunt, K. N., Evans, J. R. G., Woodthorpe, J. (1988). The influence of mixing route on the properties of ceramic injection moulding blends. British Ceramic Transactions and Journal 87, 17-21
    • Hunt, K. N., Evans, J. R. G., Woodthorpe, J. (1988). The role of coupling agents in zirconia-polypropylene suspensions for ceramic injection moulding. Polymer Engineering and Science 28, 1572-1577
    • Thomas, M. S., Evans, J. R. G. (1988). Non-uniform shrinkage in ceramic injection moulding. British Ceramic Transactions and Journal 87, 22-26
    • Zhang, J. G., Edirisinghe, M. J., Evans, J. R. G. (1988). Initial heating rate for binder removal from ceramic mouldings. Materials Letters 7, 15-18
    • Zhang, J. G., Edirisinghe, M. J., Evans, J. R. G. (1988). The use of silane coupling agents in ceramic injection moulding. Journal of Materials Science 23, 2115-2120

    1987

    • Allan, P. S., Bevis, M. J., Edirisinghe, M. J., Evans, J. R. G., Hornsby, P. R. (1987). Avoidance of defects in injection moulded technical ceramics. Journal of Materials Science Letters 6, 165-166
    • Binstead, M., Evans, J. R. G. (1987). A multistage programmable temperature ramp generator. Journal of Physics E: Scientific Instruments 20, 847-849
    • Edirisinghe, M. J., Evans, J. R. G. (1987). An oscillating pressure unit for ceramic injection moulding. Materials and Design 8, 284-288
    • Edirisinghe, M. J., Evans, J. R. G. (1987). Properties of ceramic injection moulding formulations I: Melt rheology. Journal of Materials Science 22, 269-277
    • Edirisinghe, M. J., Evans, J. R. G. (1987). Properties of ceramic injection moulding formulations II Integrity of Mouldings. Journal of Materials Science 22, 2267-2273
    • Edirisinghe, M. J., Evans, J. R. G. (1987). The rheology of ceramic injection moulding blends. British Ceramic Transactions and Journal 86, 18-22
    • EVANS, J. (1987). Ceramic injection moulding. Interceramex.
    • EVANS, J. (1987). The compounding and injection moulding ceramics. High Technology Ceramics and in Industrial Ceramics 7, 100-104 1987. Amsterdam Elsevier.
    • Evans, J. R. G., Bulpett, R., Ghezel, M. (1987). Surface treatment and adhesive bonding of PEEK II: Surface analysis. Journal of Adhesion Science and Technology 1, 291-302
    • Hamdan, S., Evans, J. R. G. (1987). Surface treatment and adhesive bonding of PEEK I: Adhesive joint strength. Journal of Adhesion Science and Technology 1, 281-302

    1986

    • Edirisinghe, M. J., Evans, J. R. G. (1986). Compounding ceramic powders prior to injection moulding. Proceedings of the British Ceramic Society 38, 67-80
    • Edirisinghe, M. J., Evans, J. R. G. (1986). Fabrication of engineering ceramics by injection moulding I: Materials selection. International Journal of High Technology Ceramics 2, 1-31
    • Edirisinghe, M. J., Evans, J. R. G. (1986). Fabrication of engineering ceramics by injection moulding II: Techniques. International Journal of High Technology Ceramics 2, 249-278

    1984

    • Evans, J. R. G., Stevens, R. (1984). The 'C' ring test for the strength of brittle materials. British Ceramic Transactions and Journal 83, 14-18
    • Evans, J. R. G., Stevens, R., Tan, S. R. (1984). A study of the sintering of beta-alumina: Microstructure and mechanical properties. British Ceramic Transactions and Journal 83, 43-49
    • Evans, J. R. G., Stevens, R., Tan, S. R. (1984). The thermal shock of beta-alumina with zirconia additions. Journal of Materials Science 19, 4068-4076
    • Evans, J. R. G., Stevens, R., Tan, S. R. (1984). The thermal shock of beta-alumina. Journal of Materials Science 19, 3692-3701

    1983

    • Evans, J. R. G. (1983). The effect of iron,aluminium and calcium on the vitrification of grain boundary glasses in nitrogen ceramics. Journal of Materials Science Letters 2, 19-21
    • Evans, J. R. G., Moulson, A. J. (1983). A high pressure(2.1 MPa), high temperature (2300K) dilatometer. Journal of Physics E: Scientific Instruments 16, 1033-1035
    • Evans, J. R. G., Moulson, A. J. (1983). Microstructure of densified reaction bonded silicon nitride. Progress in Nitrogen Ceramics. ( pp.237-243). The Hague, Netherland Nijhoff.
    • Evans, J. R. G., Moulson, A. J. (1983). On the use of powder beds during the nitridation and subsequent densification of RBSN. Journal of Materials Science Letters 2, 236-238
    • Evans, J. R. G., Moulson, A. J. (1983). The effect of impurities on the densification of RBSN. Journal of Materials Science 18, 3721-3728

    1981

    • Evans, J. R. G., Packham, D. E. (1981). The influence of cooling rate on the adhesion of polyethylene coatings applied to metals as a hot melt. Journal of Adhesion and Adhesives (January), 149-153
    • Packham, D. E., Evans, J. R. G., Davies, P. R. (1981). The effect of temperature of test on the adhesion of polyethylene coatings applied to metals as a hot melt. Journal of Adhesion 13, 29-40

    1980

    • Adam, T., Evans, J. R. G., Packham, D. E. (1980). The effect of bubbles at the interface on the adhesion of polyethylene to metals. Journal of Adhesion 10, 279-291
    • EVANS, J. (1980). Influence of interfacial regions on the properties of polyethylene coatings on metals. Industrial Division of the Annual Chemical Congress.
    • Packham, D. E., Evans, J. R. G., Davies, P. R. (1980). The effect of cooling regimes and temperature on the adhesion of polyethylene to metals. Plastics and Rubber Institute Adhesives/Polymer Properties Group Meeting.

    1979

    • Evans, J. R. G., Packham, D. E. (1979). Adhesion of polyethylene to metals: The role of surface topography. Journal of Adhesion 10, 177-191
    • Packham, D. E., Evans, J. R. G. (1979). Adhesion of polyethylene to copper : Importance of substrate topography. Journal of Adhesion 10, 39-47
    • Packham, D. E., Evans, J. R. G. (1979). The role of surface topography in the adhesion of polyethylene to metals. Polymer Properties Group Research Meeting VIII: Characterization and Properties of Polymer Interfaces (Plastics and Rubber Institute.

    1978

    • Evans, J. R. G., Packham, D. E. (1978). Adhesion of polyethylene to copper: Changes in oxide films on copper. Journal of Adhesion 9, 267-277

    1977

    • Evans, J. R. G. (1977). The Adhesion of Polyethylene Coatings to Metals. (PhD Thesis)
    • Evans, J. R. G., Packham, D. E. (1977). Adhesion of Polyethylene to Copper. In Adhesion 1 ( pp.297-310). Barking, Essex,UK Applied Science Publishers.
    • Evans, J. R. G., Packham, D. E. (1977). Polymer oxidation and surface topography in the adhesion of polyethylene to copper. Polymer surfaces Symposium.