A step-by-step guide to using the LS
What are you studying? Who will your sample be? What period would your research cover?
- Were the questions you are interested in asked in the years you want to study?
- Were they asked of the age group you want to study?
- If the responses were in pre-coded categories, will these categories meet the needs of your study?
You could also use the Data Dictionary to check the categories in the variables you hope to use.
If you have any doubts about the suitability of the LS for your research contact us at firstname.lastname@example.org, or by phoning 020 7679 1995. If the LS is not for you, we might be able to suggest alternative sources of data.
We have developed ten online training modules on:
- Designing a study population
- Analysing LS data (includes Poisson modelling and relative survival)
- LS outputs
- Socio-economic status
- Households and families
- Events (inc births, deaths, cancer registrations and widowhoods)
These modules provide information on the variables available, suitable research designs and also give indicators of sample sizes. You can get further ideas by looking at our downloadable tables.
Unless you are based outside the UK or in the private sector, you should be eligible for support from CeLSIUS (the service is free to the user, being funded by the Economic and Social Research Council). You should contact the CeLSIUS Administrative Officer: e-mail email@example.com or phone 020 7679 1995.
Officer will discuss your research question and your timescale,
and pass your request on to a Support Officer who will guide you
through the subsequent processes and make sure you get the best data
for your research question. If you require one or two
straightforward tables from the LS, either
to establish whether the LS is likely to be useful, or to
background information, we can arrange this with a minimum of
If you are based outside the UK or in the private sector, please contact the LS Unit at the Office for National Statistics (ONS) directly: email firstname.lastname@example.org or phone 01329 447 871. The postal address is MAUS, Room 1400, Office for National Statistics, Segensworth Road, Titchfield, Fareham, Hants. PO15 5RR.
There are three forms to complete. At the present time we estimate that from submission of your application to CeLSIUS to full and final approval (which must be given before any data can be released) you should allow from 6 to 8 weeks.
|Form||What is this form for?|
ONE form for each project:
Supplement Part B asks for more detail about the data you wish to use; it is usually completed in collaboration with your Support Officer.
ONE form for each project:
on behalf of the project by the lead researcher, to accept the
conditions under which LS data can be accessed and used. (An electronic
image of the signature is acceptable.)
ONE form for each named person on the
A requirement to establish that the researcher is a 'fit and proper person' under the terms of the Statistics and Registration Act 2007. (An electronic image of the signature is acceptable.)
NOTE: Forms are usually completed and submitted electronically, though paper submission is also acceptable. However, do not submit any forms as read-only or PDF as the Administrative Officer will remove unnecessary extra pages before submitting them.
recommend that you begin by completing as much as you can of the CRF
and emailing it to CeLSIUS. You will be allocated a Support Officer
who will help you with the rest of the application. You should also
send us draft Approved Researcher forms at an early stage as these usually take longer to be approved than the CRF.
You should use the data
dictionary to specify the variables that you want to include –
can be changed later but it is helpful both to you and to those
your project to draw up an initial list at this stage. The
Support Officer will assist you with this. Once the CRF is completed,
CeLSIUS will submit it to the LS Research Board at ONS. You can view
for approval (PDF 10K) for the approval of applications (or the 10K
Once the LS Research Board has approved the project your Support Officer can start work on it but cannot release any data until the final approval is given by the ONS Microdata Release Panel.
NOTE: The ONS Microdata Release Panel can only consider projects recommended by the LS Research Board once they also hold the completed and signed Data Access Agreement and have had confirmation that all named members of the research team have been given Approved Researcher status.
Every researcher who is named in the CRF must gain Approved Researcher status: the aim is to establish that there is a public benefit in allowing this person access to sensitive data and that evidence exists that s/he will know how to deal with it and will do so responsibly. A separate application must be made for each new project, even if the researcher is already an Approved Researcher on another project. Approved Researcher is a legal status and the application form will be considered as a legal document in its own right. When completing it, provide specific information on your experience and research record (including technical experience of microdata analysis) and do not assume any prior knowledge on the part of the reader. You can see the criteria used to assess the application in the guidance notes that preface the main form.
Only people who have Approved Researcher status on your project can be shown Preliminary Outputs (see below).
While you are awaiting approval of your project, arrange to attend a half-day training course if possible. A course specifically for LS users is run at intervals by ONS staff - the CeLSIUS Administrative Officer will advise you on forthcoming dates. Attendance at this course is a requirement if you are planning to visit a VML lab (see next section) and is optional but useful for others.
Support Officer will construct the dataset for your research (and amend
it if necessary as your study proceeds). The dataset will be held in a
secure system which can only be accessed from the Virtual Microdata
Laboratory (VML) areas in ONS offices; these are situated in London (Pimlico), Hampshire (Titchfield) and Wales (Newport).
One way of analysing your data is to send code (e.g. in STATA, SPSS or SAS) to be run in your absence, or discuss with your Support Officer the outputs that you require (perhaps constructing specimen tables or models) and s/he will write and run code for you. Another option is to visit a VML lab yourself and analyse your own data.
A further possibility is to specify an aggregated dataset (which will have a limited number of values) to be released for you to analyse at your place of study/work; see dataset on survival for an example. Individual-level datasets will never be released.
When you want research
outputs to leave the secure system in the VML, perhaps to work on them
on your own computer or to show them to other Approved Researchers on
the same project, they will be referred to as Preliminary Outputs. To
maintain the security of the LS all Preliminary Outputs are checked by a
Support Officer and encrypted
before being emailed to users. The approved encryption
Safeguard PrivateCrypto. If your institution does not have a
licence, you can download a freeware version of the software
Sophos Web site.
Preliminary Outputs must be stored at a secure location (which you will have specified on the Customer Request Form at questions B3 and B4) and can only be shown to Approved Researchers on the same project.
When you want to disseminate your LS results beyond your project team you must obtain Final Output Clearance from the LS Research Board.
The process for clearing final outputs reduces the risk of disclosure and ensures that the LS is properly described. Key criteria include:
- Results aggregated to a minimum cell threshold. ONS asks that in results from which a count of individual persons could possibly be calculated - e.g. percentages, or graphs based on percentages - that count is 10 or more. However, ONS may consider giving clearance to results which do not meet this criterion, if there is a scientific justification.
- The LS is described correctly. Standard descriptions are available.
- 'Source: ONS Longitudinal Study' is added to tables and figures, where appropriate.
- Results appreciate that the LS includes data for England and Wales only.
Final outputs may be either reports, journal articles, presentations or abstracts, or simply a set of results which are destined to be worked up as any of these. Allow 5 working days for final outputs clearance although many outputs are cleared more quickly than this. Complete a Final Output clearance form and send it with a copy of your work to us.
Once your final output has been cleared for public release you may disseminate it a number of times without resubmitting it for clearance, as long as no new results are included. Your cleared Final Outputs are given a clearance number which you should cite in your publications. You are asked to acknowledge the support of CeLSIUS and ONS in your publications and include a disclaimer. We have a suggestion below:
"The permission of the Office for National Statistics to use the Longitudinal Study is gratefully acknowledged, as is the help provided by staff of the Centre for Longitudinal Study Information & User Support (CeLSIUS). CeLSIUS is supported by the ESRC Census of Population Programme under project ES/K000365/1. The authors alone are responsible for the interpretation of the data."
The following copyright statement should be featured along with the above acknowledgement:
"Census output is Crown copyright and is reproduced with the permission of the Controller of HMSO and the Queen's Printer for Scotland".
If you need to cite ethical approval for the ONS LS itself, you should refer to PIAG and NIGB.
When your project is complete you should delete all Preliminary Outputs from your computer.
Page last modified on 27 nov 12 13:18 by Rachel Stuchbury